Windows 10: How to keep my cooler on after turning off PC for 10-15mins.

I need it because my pc always overheat after turning off and it can not be turned on in 1hr due to overheating over 100C

:)

 

Pc turns on, but will not display anything

So as the title says my pc will now turn on, but it will not display anything on the monitors. i have tried one and both monitors.

list of what i have tried

putting my video card into my dads computer.
resetting cmos by taking bat out for 10-15min


thats all i have tried but it worked before i had turned it off from it being plugged into my tv.

I don't know what to do again, Arg i am starting to hate pc's i want a mac so bad now.......

thanks for the help in advance.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

BSOD (more frequent) after changing CPU cooler

Hello all,

I'm in desperate for help, as I've been getting a variety of BSOD. Please help!

This computer is less than 1 yr old. 2 weekends ago I changed out my CPU Cooler to a Noctua cooler. It is worth noting that the process wasn't smooth, and I got thermal paste on the side of the chip and
a tiny speck on the bottom barely touching a pin (I know, stupid of me). I thoroughly cleaned it, put it back in, then applied the cooler. I applied it backwards the first time and needed to rotate it to correctly attach it to the CPU. I had BSOD's before
this, not not nearly as frequently.

After that point, I started getting BSOD at least once every session. They almost always happened:

1. Within 5 minutes of waking it up/turning on
2. While playing a game

The three different types I've gotten are:

1. KERNEL_AUTO_BOOST_LOCK_ACQUISITION_WITH_RAISED_IRQL
2. KMODE_EXCEPTION_NOT_HANDLED
3. KERNEL_AUTO_bOOST_INVALID_LOCK_RELEASE

Specs are:

• Ryzen 5 3600
• Gigabyte x570 Aorus Elite
• G.Skill 16 GB DDR4-3200
• Samsung 970 Evo 500gb
• GTX 1060 3gb
• Seasonic FOCUS Plus Gold 650 W 80+ Gold

Additionally, I am unable to update to the newest Windows 10 (2020-04 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4549951)).
When I try to update it gets to 100% and says Error 0x800f0831. I don't know
if this happened before or after the main problem.

Now from what I've gathered, there are a few possible explanations for this:

• I need to remount the CPU cooler. I could have applied it incorrectly and the CPU could be overheating. This explains crashing while playing games, but I don't think this explains it crashing when I first wake it up / turn it on. Easiest solution, i'd even
  put back on the original cooler to see if that helps.
• The PSU could be causing this. That explains the turn on/wake up crashes, and maybe the game crashes too. However this is a highly rated PSU that is also brand new. Could it be broken?

Programs I've downloaded and can use however necessary:

• Speccy
• WhoCrashed
• SFC /SCANNOW
  • Diagnostic tool not program
• OCCT

I'm willing to provide any info anyone needs to help me here, as I'm really out of my league. Thank you for the help!