Windows 10: How to move a boot partition from a USB stick to an HDD

I recently lost my boot partition when there was a power blip. The rest of the OS drive C: HDD was fine and there was no data loss and all programs, files, etc were still in place, but it wouldn't boot, coming to "Selected boot device failed". After working playing with BIOS settings and ultimately with a Windows Install Media on a USB stick, the Windows Installer using "Startup Repair" was able to bring the system back to life. I thought all was well and good.However...It now relies on the USB stick being available. If it's not plugged in, it goes back to the same "Selected boot d

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

USB stick previously used as a boot stick for Killdisk not recognized

Try method 2 under Windows 7 8 10 here:
Free to Remove Readonly Attribute in Windows

Method 2: Clear readonly status with Diskpart

In Windows 10, 8, 7 OS, you are also able to run Diskpart in Command Prompt to clear read-only attribute on any partition on your computer. You can follow the tutorial below:

Step 1. Open Command Line and type Diskpart
Step 2. Type list disk
Step 3. Type select disk (disk number)
Step 4. Type attributes disk clear readonly





Then try Clean

 

Changing boot hdd

I downloaded PartitionMagic8.0, but the partition i want to make is not bootable.
So the system boots from the old, loud hdd, and when i unplug the old, it doesnt boot.
Any advice or suggestions how to change boot hdd without reinstalling Winxp?