Windows 10: How to properly set screen-time that resets every 1AM everyday?

I'm trying to set a screen time on my kids' PC that resets every 1AM every day. I can only see a 12:00 AM to 12:00 AM option but can't set it to 01:00 AM to 1:00 AM. I want them to be able to use the PC for 8hours daily but resets every 1 AM. How do I properly set it? Thanks

:)

 

C5-00 Time keeps resetting to 1am

Hi



Had my C5-00 for a week or so now and all been ok except this morning. The time reset itself to 1am and the date to yesterday. I took off the auto clock and set it myself with the correct date. 15 or so minutes later it reverted back to 1am (but today's
date this time)



I have now turned it off and back on and set the time/date (which it asks on 1st boot every time! Strange) and set it back to auto-update.



As of now it is keeping its time/date but seems strange. Is this a known issue? Is there a fix? I have tried the phone update but it says everything is up-to-date.



Thanks,

Steve

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".