Windows 10: How to reapply static changes

My usb wifi adapter recently stopped working and in device manager it states that the device has not started this was shortly after I attempted to make an external switch in hyper v but an error appeared saying it couldn't create an external switch.

:)

 

Can't connect to internet with computer set with static IP

My guess is that you made a typing mistake, e.g. typing 192.186 instead of 192.168. If this is not the case then I suggest this:

• Set the machine to DHCP.
• Check if you can ping your other machines.
• Mark and copy the command below with Ctrl+C.
• Press the Windows key+R
• Press Ctrl+V, then Enter.
  
• Repeat steps 2 to 5 for a static address.
• Post the results of Step 2 (twice!) plus the contents of the desktop file IP.txt.
  

cmd.exe /c ipconfig /all >> "%UserProfile%"\Desktop\IP.txt"

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Static IP on Lumia 950.

Hi,

Follow the steps below and check if the features to apply static IP is available in your device.

• Navigate to settings.
• Search or navigate to “Wi-Fi”.
• Scroll all the way down and tap “static ip”.
• Turn on “Configure network settings manually”.
• Key in the IP address, subnet mask and other details

Note: Do remember that your router / DHCP should support allocating static IP for this feature to work.

If the above feature is not available then your model may not support the same.

Hope this helps

Regards