Windows 10: how to repair a wrong router password

How to repair a wrong entered password on the Wi-Fi router? Now I cannot connect to that router and do not know how to reset it with the correct one.

:)

 

admin password?

You can reset the Admin Password using Windows XP repair; See Here for step by step.

*Toast :toast:

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Safely Changing Router Password

HI Sherry,

You should still be able to manage your router's password even with the prompt for the site not being secure. Though if you are unable to completely access your router's gateway, you can use the router's IP.

To get the IP, follow the following steps.

• Press Windows key and X.
• Select Command Prompt.
• Type: ipconfig /all.
• On the information that will show, look for DHCP Server, take note of its IP.

You can type the IP to your browser to access your router's gateway.

If you are still having concerns with accessing your router's gateway, best to contact your internet service provider if they are the ones who gave the router, or the router's manufacturer for further assistance.

Regards.