Windows 10: how to retain the drivers installed in RS5 after OS upgrade to 19H1

Discus and support how to retain the drivers installed in RS5 after OS upgrade to 19H1 in Windows 10 Drivers and Hardware to solve the problem; hi all, i am facing a problem on my AMD system. basically i have installed my OS in NVME which has driver "Standard NVME controller driver" Also... Discussion in 'Windows 10 Drivers and Hardware' started by sridhar ts, Jul 3, 2019.

  1. SRIDHAR TS
    sridhar ts Win User

    how to retain the drivers installed in RS5 after OS upgrade to 19H1


    hi all,


    i am facing a problem on my AMD system.

    basically i have installed my OS in NVME which has driver "Standard NVME controller driver"

    Also in the system i have 2 more NVME's configured in AMD RAID which have AMD RAID driver installed.

    The above configuration is working with RS5/19H1 without any issues.


    but with above configuration if i perform a OS upgrade from RS5 ->19H1 or to any higher version.

    my system gets corrupted and i am not able to boot back to OS.

    after debug i found the AMD RAID driver gets installed on OS NVMe drive which had "Standard NVME controller driver" in RS5.

    i want to block reinstall of drivers in 19H1 when a OS upgrade is done from RS5 to 19H1


    can anyone suggest any settings that can be done in RS5 OS, so that i will not lose my operating system when i upgrade to 19H1 or anyother higher Operating system. the same drivers are retained for 19H1 as in RS5 where each controller has the same drivers.

    :)
     
    sridhar ts, Jul 3, 2019
    #1
  2. JINYU ZHANG (PACTERA)
    Jinyu Zhang (Pactera) Win User

    [Windows 10 RS5/19H1]system occurred BSOD 0x9F or 0x133 with a external monitor connected

    This is a known issue that has been fixed in 19H1. It’s in the process of being backported to RS5.
     
    Jinyu Zhang (Pactera), Jul 3, 2019
    #2
  3. PAUL WU998
    Paul Wu998 Win User
    [Windows 10 RS5/19H1]system occurred BSOD 0x9F or 0x133 with a external monitor connected

    Just base on Windows RS5 OS or 19H1 OS, we found notebook system always happen BSOD 0x9F(DRIVER_POWER_STATE_FAILURE) or 0x133 (DPC_WATCHDOG_VIOLATION) in below scenario:

    1.plug in a external monitor (type-c or TBT monitor) or TBT storage

    2.system do S4 with a external monitor connencted

    3.system do cold boot with a external monitor connencted

    4.system do warm boot with a external monitor connencted

    could you please help to confirm this symptom?

    thanks very much!
     
    Paul Wu998, Jul 3, 2019
    #3
  4. AKSHAYAKPOOR
    akshayakpoor Win User

    how to retain the drivers installed in RS5 after OS upgrade to 19H1

    [Windows 10 RS5/19H1]system occurred BSOD 0x9F or 0x133 with a external monitor connected

     
    akshayakpoor, Jul 3, 2019
    #4
Thema:

how to retain the drivers installed in RS5 after OS upgrade to 19H1

Loading...

  1. how to retain the drivers installed in RS5 after OS upgrade to 19H1 - Similar Threads - retain drivers installed

  2. Bluetooth drivers not retained

    in Windows 10 Drivers and Hardware
    Bluetooth drivers not retained: Due to a malfunction, the wireless module of my Dell XPS 15 had to be replaced. Since the replacement, I'm unable to use the bluetooth which is included on the same module (Intell AC9260). I've tried the drivers suggested by Windows as well as the manufacturer specific driver...

  3. Have you used the latest RS5, winver 1909 OS?

    in Windows 10 Customization
    Have you used the latest RS5, winver 1909 OS?: Have you used the latest RS5, winver 1909 OS? https://answers.microsoft.com/en-us/windows/forum/all/windows-os/6e03e280-db34-4c80-9059-3d6f94750e10

  4. how to retain the same drivers installed on RS5 even after update to 19H1 upgrade

    in Windows 10 Installation and Upgrade
    how to retain the same drivers installed on RS5 even after update to 19H1 upgrade: hi all, i am facing a problem on my AMD system. basically i have installed my OS in NVME which has driver "Standard NVME controller driver" Also in the system i have 2 more NVME's configured in AMD RAID which have AMD RAID driver installed. The above configuration is...

  5. [Windows 10 RS5/19H1]system occurred BSOD 0x9F or 0x133 with a external monitor connected

    in Windows 10 Drivers and Hardware
    [Windows 10 RS5/19H1]system occurred BSOD 0x9F or 0x133 with a external monitor connected: Just base on Windows RS5 OS or 19H1 OS, we found notebook system always happen BSOD 0x9F(DRIVER_POWER_STATE_FAILURE) or 0x133 (DPC_WATCHDOG_VIOLATION) in below scenario: 1.plug in a external monitor (type-c or TBT monitor) or TBT storage 2.system do S4 with a external...

  6. Braswell-RS5-Screen flicker-Graphicsdriver-issueBraswell-RS5-Screen...

    in Windows 10 Drivers and Hardware
    Braswell-RS5-Screen flicker-Graphicsdriver-issueBraswell-RS5-Screen...: There is a Braswell-J3160 machine with RS3 systems, after upgrade to Win10 RS5 (1809). Have installed Intel VGA driver 20.19.15.5063 (2018/10/29), 20.19.15.4703 (2017/7/28), 20.19.15.4320 (2016/6/3), Screen flicker will occur (obviously when you log in to Windows, flicker...

  7. 19H1 Update won't install

    in Windows 10 Installation and Upgrade
    19H1 Update won't install: For three days now, Windows 10 has been telling me that "Windows 10 Insider Preview 10.0.18362.1 (19H1_RELEASE) amd64 2019-03 (3)" is ready to install. So, I follow the instructions and restart and update the computer. The update makes it to 7% to 8% and then the computer...

  8. Keeping OS installation and software after hardware upgrade

    in Windows 10 Drivers and Hardware
    Keeping OS installation and software after hardware upgrade: My PC's motherboard and processor were bought in 2010. I currently have an i3 processor. I am planning to upgrade to i7 with a new motherboard. Is there a way that I don't have to reinstall windows and software after hardware upgrade? I am currently running Windows 10-64 bit...

  9. Want to move to another OS but retain license w/ free upgrade to 10

    in Windows 10 Support
    Want to move to another OS but retain license w/ free upgrade to 10: Hate to come here and ask this. Purpose of this thread is not to trash W10. I'd like to format and install another OS on my desktop's HDD. What is the best way to keep my activated 8.1x64 Pro COA with free 10 upgrade? Can I shrink my partition way down and just do a...

  10. Where does the OS reside after an upgrade installation ?

    in Windows 10 Support
    Where does the OS reside after an upgrade installation ?: This is just something I wondered over. For example... if you take a traditional HDD and install Windows then I believe the OS will reside in a contiguous portion of the drive. So if you had Windows installed on a 100Gb partition and the OS took 20Gb, then the first 20Gb...