Windows 10: How to search for the IP address in your windows event log. Is there away to see what my...

Hello there I have question, how do you search for the IP addresses that I have connected to, in my windows event log? Is there away to see what my previous IP addresses I connected to like in the past 4 days?

submitted by /u/Techboi022
[link] [comments]

:)

 

Finding IP address

Hello,

Thank you for writing to Microsoft Community Forums.

I suggest you to follow the steps mentioned below to find printer’s IP address:

1. Type Devices and Printers in the Windows search bar.
   
2. Select on the printer and click on
   Manage.
   
3. Click on the Ports tab.
   You will be able to find printer’s IP address under the ‘Ports’ tab.
   

Few printers also have a “Test print” option on the printer. When you print a test page from network printer, the page shows the IP address along with other details.

Note: If it is set on DHCP mode the IP address will constantly change.
The IP address is assigned automatically by your router using a protocol called DHCP.

Hope it helps.

Sandeep Kumar M

Microsoft Community – Moderator

 

ip address problem

Hi,

Thank you for contacting Microsoft Community. I understand that you have an issue with IP Address, I will surely help you to fix this issue.



This issue could have occurred due incorrect TCP\IP Address settings.



Try the steps listed here:



Method 1:

I suggest you to reset TCP\IP and check if it helps.



How to reset TCP/IP by using the NetShell utility

https://support.microsoft.com/en-us/kb/299357

Note: Applies to Windows 10.



Method 2:

If the issue persists, I suggest you to try these steps to Flush DNS and request a new IP address from your ISP server. Check if it helps.

• 
  Click on
  Start and type cmd on start search.
  
• 
  Right-click on command prompt Run
  and selectas administrator.
  
• 
  At the command prompt, type the following commands and hit
  Enter after each command.
  

ipconfig /flushdns

ipconfig /registerdns

ipconfig /release

ipconfig /renew

exit



Hope this information helps. Reply to the post with updated status of the issue so that we can assist you further.

 

2 IP address conflict

Hi Jessirel,

IP address conflict usually occurs after defining a static IP address. To resolve, try following these steps:

Run the Network troubleshooter

1. In the search box on the taskbar, type Network troubleshooter, and then select
   Identify and repair network problems from the list of results.
2. Follow the steps in the troubleshooter and see if that fixes the problem.

If that doesn’t fix your connection problem, try these things:

• Reset the TCP/IP stack
• Release the IP address
• Renew the IP address
• Flush and reset the DNS client resolver cache

Run these networking commands in Command Prompt:

1. In the search box on the taskbar, type Command prompt, press and hold (or right-click)
   Command prompt, and then select Run as administrator >
   Yes.
2. At the command prompt, run the following commands in the listed order, and then check to see if that fixes your connection problem:
   • Type netsh winsock reset and press Enter.
   • Type netsh int ip reset and press Enter.
   • Type ipconfig /release and press Enter.
   • Type ipconfig /renew and press Enter.
   • Type ipconfig /flushdns and press Enter.

To learn more, please check this article: Fix duplicate IP address conflicts on a DHCP network

Let usknow if you need further assistance.