Windows 10: How to setup Windows Print Server and deploy printers

​

If you are an IT administrator, it is essential to allocate your resources, such as Printers, properly. In this post, we are going to learn how you can setup Windows Print Server and deploy printers using the Group Policy. This will be a detailed tutorial, where we will see how you can the Print and document services […]

This article How to setup Windows Print Server and deploy printers first appeared on TheWindowsClub.com.

read more...

 

Error - Printing on Network printer

We have 4 printers on our Windows print server. The server was migrated from win2k3 to 2k8 on friday. 3/4 printers are working great, the other is having issues. When trying to print a test page to it, it gets a job status of Error - Printing.

When sending a small word document to it, it sends it to the printer, the queue is empty but nothing prints. If I goto the printer itself, it doesnt show any errors and I can print things such as information sheets and diagnostic files just fine.

All four printers are the same model, all 4 have a static IP. I can ping the printer successfully. I've tried printing from both an XP machine and the print server itself. I tried removing and adding the printer on the print server. And lastly, uunplugged the printer for 30 seconds, plugged it back in.

Any ideas?

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

windows server, add windows shared printer to Print Management

hi

i add windows shared printer ( named A ) to my windows server 2019. the A printer is shown in control panel\deive and printer but is not shown in print servers\printers.

Q: what kind of printer is listed in Print Servers\Printers ?