Windows 10: How to start Windows Security Service when it is not listed in services.msc ??

A malware broke into my system and I cannot open Windows Defender or Windows Security Services. Windows Security just doesn't open anymore. I am attaching the log I received from using defender_diag.bat here. I cannot format my system and I have tried repairing the Windows as well using an ISO but isn't repairing, and instead is asking to do a full format of the system. Please help me out here.

:)

 

Securing Windows 2000/XP/Server 2003 services HOW TO

I will try changing their settings sometime, the one thing I've noticed about this guide is that it doesn't list the Windows services that NEED to be left as local system, so some people might not be too sure what they're doing and worry about any that aren't listed. Just a suggestion that you might want to include in any future revisions. *Smile

The non-default ones I have that you have not listed are:

.Net Runtime Optimization Service v2.0.50727_X86
Ati HotKey Poller
ATI Smart
AVG E-mail Scanner
AVG7 Alert Manager Server
AVG7 Update Service
BlueSoleil Hid Service
Bluetooth Support Service
ewido anti-spyware 4.0 guard
iPod Service
Messenger Sharing USN Journal Reader Service
Service Layer
Windows Defender Service

The problem is that the only ones of these I actually use are The AVG and Windows Defender services and occasionally the "Service Layer" service (related to Nokia PC Suite) and the "Messenger Sharing USN Journal Reader Service" (related to WindowsLive Messenger). Anyway, I'll see how much I can secure those and post back how I get on. I'll try to test it sometime this week just I'm a bit waring of changing the AVG settings because the only way to test if it was still working would be for a virus to be detected... and I' rather I didn't get viruses!

 

Securing Windows 2000/XP/Server 2003 services HOW TO

This is all i could save. I dont know if people can see what I can in the Wiki, but I got this article the others he deleted b4 he posted them in the wiki and i dont have the powers even in my sections to bring them back...perhaps a back up but Im not sure we have one ill go see. He did a damn good job at making sure nothing of his existed after he left...Im at school but when i get home ill email him and see if i can get him back im not done fighting yet.-Solaris17




Securing Windows 2000/XP/Server 2003 services HOW TO
I went at ALL of the services in Windows Server 2003 (some will not be in XP for instance, & Windows 2000 has no NETWORK SERVICE or LOCAL SERVICE as far as I know, but not sure, you can always make a limited privelege user too for this on 2000 if needed)...

I did testing to see which services could be run/logged in as LOCAL SERVICE, or NETWORK SERVICE, rather than the default of LOCAL SYSTEM (which means Operating System entity level privileges - which CAN be "misused" by various spyware/malware/virus exploits).


LOCAL SERVICE startable list (vs. LocalSystem Logon Default):


--------------------------------------------------------------------------------

Acronis Scheduler 2 Service
Alerter (needs Workstation Service Running)
COM+ System Application
GHOST
Indexing Service
NVIDIA Display Driver Service
Office Source Engine
O&O Clever Cache
Remote Registry
Sandra Service
Sandra Data Service
SmartCard
Tcp/IP NetBIOS Helper
Telnet
UserProfile Hive Cleanup Service
Volume Shadowing Service
Windows UserMode Drivers
Windows Image Acquisition
WinHTTP Proxy AutoDiscovery Service
NETWORK SERVICE startable list (vs. LocalSystem Logon Default):


--------------------------------------------------------------------------------

ASP.NET State Service
Application Layer Gateway
Clipbook (needs Network DDE & Network DDE DSDM)
Microsoft Shadow Copy Provider
Executive Software Undelete
DNS Client
DHCP Client
Error Reporting
FileZilla Server
Machine Debug Manager
Merger
NetMeeting Remote Desktop Sharing Service
Network DDE
Network DDE DSDM
PDEngine (Raxco PerfectDisk)
Performance Logs & Alerts
RPC
Remote Desktop Help Session Manager Service
Remote Packet Capture Protocol v.0 (experimental MS service)
Resultant Set of Policies Provider
SAV Roam
Symantec LiveUpdate
Visual Studio 2005 Remote Debug
PLEASE NOTE: Each service uses a BLANK password when reassigning their logon entity (when you change it from the default of LOCAL SYSTEM Account), because they use SID's as far as I know, not standard passwords.


--------------------------------------------------------------------------------

WHEN YOU TEST THIS, AFTER RESETTING THE LOGON USER ENTITY EACH SERVICE USES: Just run your system awhile, & if say, Norton Antivirus refuses to update, or run right? You KNOW you set it wrong... say, if one you test that I do NOT list won't run as LOCAL SERVICE? Try NETWORK SERVICE instead... if that fails? YOU ARE STUCK USING LOCAL SYSTEM!

If you cannot operate properly while changing the security logon entity context of a service (should NOT happen w/ 3rd party services, & this article shows you which ones can be altered safely)?

Boot to "Safe Mode", & reset that service's logon entity back to LOCAL SYSTEM again & accept it cannot do this security technique is all... it DOES happen!

If that fails? There are commands in the "Recovery Console" (installed from your Windows installation CD as a bootup option while in Windows using this commandline -> D:\i386\winnt32.exe /cmdcons, where D is your CD-Rom driveletter (substitute in your dvd/cd driveletter for D of course)) of:

ListSvc (shows services & drivers states of stopped or started)

Enable (starts up a service &/or driver)

Disable (stops a server &/or driver)

Which can turn them back on if/when needed

Last edited by APK on 03/04/2007
I.E. -> I removed Telephony, Symantec AntiVirus, & Virtual Disk Service!

(ON Virtual Disk Service being removed, specifically: This was done solely because, although it will run as LOCAL SERVICE, diskmgmt.msc will not be able to work! Even though the Logical Disk Manager service does not list VirtualDisk as a dependency, this occurs, so VirtualDisk service was pulled from BOTH the LOCAL SERVICE and NETWORK SERVICE lists here... apk)

SECURING SERVICES @ THE ACL LEVEL VIA A SECURITY POLICY HOW-TO:

STEP #1: CONFIGURE A CUSTOM Microsoft Management Console for this!

Configuring yourself a "CUSTOM MMC.EXE (Microsoft Mgt. Console)" setup for security policy templates, here is how (these are NOT default Computer Mgt. tools, so you have to do this yourself, or run them by themselves, but this makes working w/ them convenient):

===============================================================
The next part's per BelArcGuy of BELARC ADVISOR's advice (pun intended):
==============================================
Anyone want to try a test CompletelyBonkers (new user here) turned me onto?

==============================================
"Security Configuration and Analysis" is an MMC snap-in. To access the MMC, type in mmc to the Windows Run.. command to pop up the console. Then use it's File|Add/Remove Snap-in... command and click the Add button on the resulting dialog. Choose both "Security Configuration and Analysis" and "Security Templates", close that dialog, and OK. You'll end up with a management console that has both of those snap-ins enabled. The whole MMC mechanism is a bit weird, but does work"

(It's easy, & it works, & is necessary for the actual steps to do this, below)


--------------------------------------------------------------------------------

(Next, is the actual "meat" of what we need to do, per Microsoft, to set ACLs)


--------------------------------------------------------------------------------

STEP #2: HOW TO: Define Security Templates By Using the Security Templates Snap-In in Windows Server 2003

Define Security Templates By Using the Security Templates Snap-In - Windows Server

Create and Define a New Security Template

(To define a new security template, follow these steps)

1. In the console tree, expand Security Templates. 2. Right-click %SystemRoot%\Security\Templates, and then click New Template. 3. In the Template name box, type a name for the new template.

(If you want, you can type a description in the Description box, and then click OK)

The new security template appears in the list of security templates. Note that the security settings for this template are not yet defined. When you expand the new security template in the console tree, expand each component of the template, and then double-click each security setting that is contained in that component, a status of Not Defined appears in the Computer Setting column.

1. To define a System Services policy, follow these steps: a. Expand System Services. b. In the right pane, double-click the service that you want to configure. c. Specify the options that you want, and then click OK.

==============================================
)
APK (added 03/08/2007)

 

Security Center Service won't start

Hi,

The Security Center service is dependent on other services for it to be able to start properly. You can follow these steps to start the dependent services in the correct order:

• Click Start, type cmd, right-click on
  Command Prompt and select Run as Administrator.
• At the command prompt, run the following commands in the listed order:
  • Type sc start DCOMLaunch and press Enter.
  • Type sc start RpcSs and press Enter.
  • Type sc config Winmgmt start= auto and press Enter.
  • Type sc start Winmgmt and press Enter.
  • Type sc config Wscsvc start= auto and press Enter.
  • Type sc start wscsvc and press Enter.
• Close the command prompt window and try to start the Security Center
  service again.

Let us know if the solution above works or if you have any other concerns.