Windows 10: How to take a Screenshot in BIOS or UEFI

​

In this tutorial, we will show you how to take a screenshot in BIOS or UEFI. Though we have so many options to take a screenshot in Windows PC in Windows PC, those don’t help to capture BIOS settings or UEFI BIOS Utility. While we always have this simple option, which is to use a […]

This article How to take a Screenshot in BIOS or UEFI first appeared on TheWindowsClub.com.

read more...

 

bios

Hi all i am new in this forum, i need meanings step by step of each item listed in the bios Phoenix-Award

 

Finally, Gigabyte Goes UEFI

I am very pleased with the UEFI BIOS makes things just easy all round to be able to point and click my way around. I of course run it in Advanced mode not the Basic Mode like the screenshots posted.
I think it is a great step forward for ease of use. Not just purely a cosmetic thing.

 

Changed to gpt and uefi bios, now windows wont boot

Emil Gyldenskog Nøsavik

Thank you for posting in the Microsoft community.

When a MBR hard disk is converted to GPT, if you can't get into the system, it's usually due to incorrect BIOS settings or no UEFI boot. Here are the steps to solve this problem:

1. Enter PE system: Use a USB flash drive to boot and enter the PE system (pre-installation environment) to make sure the data is normal.
   
2. Check the BIOS settings:
   
   • Make sure UEFI boot is set in BIOS.
     
   • If the BIOS is set to UEFI boot, but the partition is still MBR partition, you need to modify the BIOS settings to match the hard disk partition mode and boot mode.
     
3. Use a PE tool that supports UEFI: Make sure the PE tool you use supports UEFI repair boot.
   
4. Create an EFI system partition:
   
   • In PE system, open "Disk Management", find the SSD (usually labeled as "Disk 1"), right-click and select "Compress Volume" to compress about 500MB of space.
     
   • Open a command prompt, type `diskpart` and enter.
     
   • Use the `select disk` command to select the SSD.
     
   • Use the `create partition efi` command to create the EFI system partition.
     
   • Format the EFI partition using the `format fs=fat quick` command.
     
   • Use the `assign` command to assign a drive letter to the EFI partition.
     
5. Bootstrap Repair:
   
   • In a command prompt window, type `bcdboot x:\windows /s y: /f uefi`, where `x` is the drive letter where the system is located in the SSD and `y` is the drive letter of the EFI partition.
     

Hope the above information can help you



Best Wish

Shawn Z | Microsoft Community Support Specialist