Windows 10: How to tell if my PC has WiFi 6

​

WiFi 6 is a 6th generation WiFi and the successor of WiFi 5. It is also known as AX WiFi or 802.11ax WiFi. WiFi 6 has a number of benefits over its older counterparts. The WiFi 5 or 802.11ac was introduced in the year 2014. Since its launch, the number of devices connected to a […]

This article How to tell if my PC has WiFi 6 first appeared on TheWindowsClub.com.

read more...

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it

 

ICS From WiFi to LAN on Win 10 pc

I'm trying to set up a small temporary 6 computer network using all Windows 10 Pro PCs running version 1803.

I am trying to share one computers WiFi connection to the other PCs over LAN using an 8 port smart switch.

I searched extensively and not found an answer, some say it's not supported anymore, some say it is but it's configuration etc.

I've tried bridging the WiFi and LAN adapters, enabling sharing on the WiFi card and enabling all the services. On this part I noticed that the services are listed with numbers 1700 - 17xx instead of the names as on win 7.

I've also gone to services.msc to check for the ICS service but it's not listed and I haven't found a way to install it.

I can config the PCs to use static IPs etc but I still haven't managed to get it to work!

Any suggestions that don't involve more hardware would be appreciated!

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??