Windows 10: how to update usb composite device-

i need to download it.. i think. I cant do it autmaticaly.

:)

 

USB composite device "driver error"

USB composite device "driver error" is appearing in device manager. Update Driver Software does not correct problem. Any suggestions?

 

USB-Speakers, USB Composite Device Cannot start. (Code 10)

Hello Monty,

The code that you’re getting is a common driver error. This could sometimes mean that a driver for a specific device is failing to load which could be your smart card reader or other USB composite device. To isolate the issue, kindly provide us the following
information:

• Have you made any changes on your computer prior to the issue?
• Have you installed the latest Windows updates?
• Do you have any external other device connected via USB?
• How did you update your USB Composite Device drivers?

As an initial troubleshooting, we suggest that you follow the methods below:

Method 1: Uninstall the Driver

1. Go to Device Manager.
2. Locate the device that is causing the code 10 error. Right-click it and select Uninstall on the context menu.
3. When prompted to confirm the uninstallation, check the box next to “Delete the driver software for this device” and click the OK button.
4. Restart your computer and check to see if the issue is resolved.

Method 2: Update the driver

You can update the driver manually by going to the manufacturer’s website for the device that has the code 10 error, and search for the most recent correct driver. You may also follow these steps on how to update the USB
composite device driver via Device manager:

1. Hit Windows key + R key together to open Run dialog box.
   
   Type devmgmt.msc in the box and hit Enter to open Device Manager.
2. Expand Universal Serial Bus controllers dialog.
   
   Find and right-click on USB Composite Device.
   
   Then click Update Driver Software.
3. Click Search automatically for updated driver software.

After doing the said methods, check if the issue persists.

Feel free to get back to us should you need further assistance.

 

USB Composite Device

USB Composite Device is an older USB device and might not work with USB 3.0

Plug the device into an available USB 2.0 port, and click Next. Otherwise, click Cancel.

The printer cable was working perfectly fine until a few weeks ago. The same problem erupted before but after several minutes on trying to fix it, the printer worked. I am aware that the USB is definitely in a 2.0 port and not a 3.0. Prior to an update (I
think), the printer worked perfectly fine until the problem appeared. I did not remove or put the wire in any other slot and it suddenly stopped working.

I have tried to update all of the drivers under "Universal Serial Bus Controller" and everything was up to date. I also tried to then put the cable in different ports, yet nothing.

USB Composite Device can’t work properly with USB 3.0.

Not fixed

If the USB 2.0 device is incompatible with USB 3.0, plugging it into a USB 2.0 port can solve the problem.

USB Composite Device is an older USB device and might not work with USB 3.0

Informational

Some USB 2.0 devices are incompatible with USB 3.0. Plugging them into a USB 2.0 port can fix the problem.