Windows 10: HP 15 f271wm can't find SSD on win10 install

I'm trying to do a fresh install of Win10 on this laptop and I'm getting the "No drives found" error when I get to the point of trying to pick the drive.





I've run built in diagnostics and it sees the hard drive (I've even tried two different drives).
I've also booted off a linux usb stick and the drive shows up there, even tried using gparted to create an NTFS partition there first even though I was 99% certain that wouldn't help.

I've tried turning off secure boot, turning on legacy support, tried loading drivers from the intel chipset (this has the 2.16GHz Intel Pentium N3540 cpu if that helps), and nothing is helping.

I will say, I don't see the drive in the BIOS, but as stated, diagnostics sees it AND linux usb saw it no problem.

Can someone please help me find another option?

:)

 

Win10 clean install on Samsung SSD 850 EVO

BLUF: SSD is not listed ubder "Where do you want to install Windows?"

Steps Complete:

1. I've create a Win10 bootable install usb.

2. I connect the new Samsung SSD 850 EVO via SATA.

3. I reboot PC and verify SSD is seen by the motherboard/BIOS

4. Begin Win10 install via usb.

5. Get to "Where do you want to install Windows?" and the SSD is not listed

Problems:

1. Samsung does not offer a driver for the 850 on their website

2. Cannot locate driver elsewhere

Unsuccessful Mitigations Steps Attempt:

A. Format & partition SSD via Windows Disk Management, then retried steps 1-5 above....same result

B. Clone existing HHD onto SSD via "Image for Windows" by TeraByte, then verified SSD contents via Windows Explorer....similar result

Can you please offer some advice on locating a driver for a Samsung SSD 850 EVO 1TB drive? Or an alternative method?

Thank you

 

Migrating Win10 to NVMe SSD

I am going to migrate my Win10 to my NVMe SSD. Installation wise there should be no problem. However I cannot seem to be able to erase the old Windows 10 on the SATA SSD. If I boot from USB Win10 Installation media it only ask me whether I want to repair the SATA SSD Win10 or not. Any ideas on how to complete erase the SSD that currently have Win10 on it? I tried sanitize drive and PSID revert in Win10, neither would work. The SATA SSD is Crucial MX200.

 

Upgrading HP SSD drive on HP 750-524

I purchased an HP Envy tower with a 128Gb SSD which is where Windows is installed, I have purchased a new 1TB SSD drive that I would like to replace the 128 GB drive with. My machine did not come with the Windows 10 Media, what steps do I need to take before
I install the new drive and install windows.

• Where do I get the Windows 10 install
• What steps are needed to create an Install disk
• Do I have to deactivate my old install before removing the old drive.

Please let me know if there are any other considerations.

Best Regards,

Wes