Windows 10: HP Designjet 130, blank front panel, yellow led flashes, no communication with HP System...

Discus and support HP Designjet 130, blank front panel, yellow led flashes, no communication with HP System... in Windows 10 Gaming to solve the problem; I replaced the electronics module in my HP Designjet 130 because the existing one was broken.I took the electronics module from another working printer... Discussion in 'Windows 10 Gaming' started by H. F. Kaiser, Mar 13, 2024.

  1. H. F. KAISER
    H. F. Kaiser Win User

    HP Designjet 130, blank front panel, yellow led flashes, no communication with HP System...


    I replaced the electronics module in my HP Designjet 130 because the existing one was broken.I took the electronics module from another working printer I had HP Designjet 130nr.The electronics module was working fine in the HP Designjet 130nr, but the printer hardware was partly worn out/damaged, that's why I wanted to put the electronics module in the HP Designjet 130.At startup I get the following symptoms:The display shows a blank lit front panel and the yellow led flashes cannot turn off the printer or enter the restricted utilities menu "EEPROM clean, factory reset, etc."--nothing m

    :)
     
    H. F. Kaiser, Mar 13, 2024
    #1
  2. ROUBERT POTGIETER
    Roubert Potgieter Win User

    HP DesignJet 130 not printing

    Please help! My HP DesignJet 130 printer has stopped working.

    Exhausted all troubleshooting options that I could think about or find. Nothing works.

    Please HELP urgently.

    I have tested the printer on Windows 8.1 laptop and it works, so the hardware is not faulty. It seems to all point to an issue between Windows 10 and the HP Designjet 130 driver.

    Funny thing is that it has been working fine on Windows 10 for quite a while, so I think it might be a recent Windows update that has caused the prolem.
     
    Roubert Potgieter, Mar 13, 2024
    #2
  3. ONE MORE CUSTOMER WHO CANNOT SIGN ON
    One More Customer who Cannot Sign on Win User
    HP DesignJet 130 Windows 10 Printer Not Working After Upgrade

    RE: HP DesignJet 130 vs. Windows 10 – Printer Issue

    Please help solve HP Designjet 130 AFTER Windows 10 upgrade

    Pre Windows diagnostic – no problem – go ahead – upgrade

    Printer worked fine in Windows XP and then 7

    Sees printer will not print!

    Removed printer and reinstalled

    Current HP Driver 8.10 installed

    Yes this is the default printer (I can print to a network printer)

    Printer is connected with parallel cable LPT1 Local Install.

    Device manager – says no issue “working properly”

    HP Print and Scan Doctor – can’t connect (sees it can’t connect)

    Restarted Print Spooler – still no print

    Printer has been removed and reinstalled

    Ran Microsoft troubleshooting, etc. – kicks me to “more help forum, community”

    Followed and exhausted all FAQ, forums, and tech suggestions from HP and Microsoft

    Turned off Firewall – that was not issue

    Uninstalled Adobe Reader – that was not issue

    Turned off security – that was not the issue

    HELP
     
    One More Customer who Cannot Sign on, Mar 13, 2024
    #3
  4. CHAD HP
    Chad Hp Win User

    HP Designjet 130, blank front panel, yellow led flashes, no communication with HP System...

    HP DesignJet 130 not printing

    I work on HP printers and have had several calls the past five days The only workaround I have found is to download the DesignJet T120 driver for 24” plotters and then the T520 for the 42” plotters and this has worked for several people.

    The only fallback is the T520 is a 36 inch plotter so that’s as wide as you’ll be able to print not 42”.

    I am going to try the other gentleman’s post about uninstalling the updates and see if that does correct it. But if you need a quick fix, download the Designjet t120 driver and it will print.

    T120 Driver

    https://support.hp.com/us-en/driver...jet-t120-printer/5263073/swItemId/pl-234796-7

    T520 driver

    https://support.hp.com/us-en/driver...0-printer-series/5263079/swItemId/pl-234796-7

    I hope this helps.
     
    Chad Hp, Mar 13, 2024
    #4
Thema:

HP Designjet 130, blank front panel, yellow led flashes, no communication with HP System...

Loading...

  1. HP Designjet 130, blank front panel, yellow led flashes, no communication with HP System... - Similar Threads - Designjet 130 blank

  2. HP Designjet 130, blank front panel, yellow led flashes, no communication with HP System...

    in Windows 10 Software and Apps
    HP Designjet 130, blank front panel, yellow led flashes, no communication with HP System...: I replaced the electronics module in my HP Designjet 130 because the existing one was broken.I took the electronics module from another working printer I had HP Designjet 130nr.The electronics module was working fine in the HP Designjet 130nr, but the printer hardware was...

  3. HP DesignJet 70

    in Windows 10 Gaming
    HP DesignJet 70: Hi, I have an admittedly elderly HP Designjet 70 A2 printer which has worked reliably for a number of years. However, on using it this year, the preferences page is offering different options from previously, most notably paper size, and most annoyingly notably, no longer...

  4. HP DesignJet 70

    in Windows 10 Software and Apps
    HP DesignJet 70: Hi, I have an admittedly elderly HP Designjet 70 A2 printer which has worked reliably for a number of years. However, on using it this year, the preferences page is offering different options from previously, most notably paper size, and most annoyingly notably, no longer...

  5. HP DesignJet 70

    in Windows 10 Drivers and Hardware
    HP DesignJet 70: Hi, I have an admittedly elderly HP Designjet 70 A2 printer which has worked reliably for a number of years. However, on using it this year, the preferences page is offering different options from previously, most notably paper size, and most annoyingly notably, no longer...

  6. HP Designjet 110 plus

    in Windows 10 Drivers and Hardware
    HP Designjet 110 plus: Hp Designjet 110plus does not want to work on Windows 10 Version 20h2 it gives an error of 0x0000007f https://answers.microsoft.com/en-us/windows/forum/all/hp-designjet-110-plus/e3c2e2c4-27ce-4c06-8845-09e9b55865af

  7. HP Designjet 500, no output from computer

    in Windows 10 Drivers and Hardware
    HP Designjet 500, no output from computer: I tried hooking my HP laptopWindows 10, Version 2004, Build 19041.746 to my HP Designjet 500 printer. Drivers seem to be fine, Test page says it printed, but no output to printer. Is there a fix similar to the issue in June 2020 with versions 1903, 1909? Thanks, Jim...

  8. HP designjet 500 42

    in Windows 10 Installation and Upgrade
    HP designjet 500 42: I am having trouble printing to this printer. Have removed device and reinstalled, gone through troubleshoot several times, says its fixed, it aint. Anyone have a clue? Very frustrating. It worked OK until we put on Windows 10....

  9. HP DesignJet 111 Roll + W10e = 0

    in Windows 10 Drivers and Hardware
    HP DesignJet 111 Roll + W10e = 0: Hello When the Win10enterprice USB-connected printer is installed, the HP DesignJet 111 does not print anything, not even a test page, although the system says everything is OK. Who can help ???...

  10. HP DesignJet 130 not printing

    in Windows 10 Drivers and Hardware
    HP DesignJet 130 not printing: Please help! My HP DesignJet 130 printer has stopped working. Exhausted all troubleshooting options that I could think about or find. Nothing works. Please HELP urgently. I have tested the printer on Windows 8.1 laptop and it works, so the hardware is not faulty. It...