Windows 10: HP laptop Win 11-suddenly no sound- troubleshoot didnt help

HP laptop Win 11 from 2022-sound stopped and the 1st 2 troubleshoots didnt restore sound-Realtec says working properly, uninstall didnt help

:)

 

HP Pavilion X2 upgrade to 1709 - no sound

I eventually got my detachable laptop to upgrade to Fall Creator, and was very pleased, then noticed that when I received notifications there was no sound, checked all the usual suspects, volume, system sounds, drivers, etc even plugged a headset in, no sound. Using the HP troubleshooter, its first step was to take me through Windows troubleshooter, through the drivers uninstall, it even had me reset my BIOS. HP have a hardware tester built into the UEFI, and on following the instructions, sounds out of the speakers, indicating a pass, but still no sounds from W10. The last suggestion from HP was to update the BIOS, however knowing the system worked before the upgrade decided against that. I followed the roll-back instruction, and after noting the audio drivers in 1709, found the same drivers in the roll backed version, but the sound was working again - bizarre!

 

HP Laptop Boot Loop

I am encountering a boot loop problem with my HP laptop. Upon startup, it shows the HP logo and loading dots for about 11 seconds, then goes to a blank screen for approximately a minute before automatically restarting. The power button does not turn off during this cycle.

Troubleshooting Steps Taken:

• Tried hard reset and accessing BIOS/UEFI settings.
  
• Unable to boot into Safe Mode or recovery environment.
  

please see here the recorded video demonstrating the boot loop behavior for reference.

Any advice, troubleshooting steps, or insights into what might be causing this problem would be greatly appreciated.

Thank you in advance for your help and suggestions.

 

Sound Troubleshooter

Hello,

I request you to try the methods below:

Method 1:

Hardware Troubleshoot

Windows 10 has a built-in troubleshooter to check and fix issues with Sound. I would suggest you to run this troubleshooter to check if the issue is with your Audio.

Refer these steps:

• Press Windows key +X, select Control panel.
• Change the view by option on the top right to Large icons.
• Click on troubleshooting and click on the view all option on the left panel.
• Run the playing Audio troubleshooter.

Method 2:

Sound problems can be caused by cables that aren't connected properly, damaged drivers, incompatible drivers, sound settings, missing updates, and problems with your sound card.

I request you to follow the below steps:

Step 1: Uninstall the Sound card Drivers

• Press “Windows Logo” + “X” keys on the keyboard.
• Click on “Device Manager” from that list.
• Search for the Sound driver from the device list, right click on it and then select “Uninstall”. On the un-installation window, if you have an option: “Delete the driver software for this device” you may select that and then
  remove the corrupted drivers from the computer.
• Follow the on-screen instructions to complete it and the restart the computer if prompted.
• After the restart, please go ahead with the next steps to install the latest drivers and check if that resolves the issue.

Update Driver Software from the Manufacturer’s website.

Step 2: Go to the Computer or Sound Card manufacturer’s website and search for the latest Windows 10 drivers available for the Sound Card model and then install it by following the instructions given in the website.

I also request you to follow the below article:

Fix sound problems

http://windows.microsoft.com/en-us/windows-10/fix-sound-problems#v1h=tab01

I hope this helps you. If you have any further query in future, feel free to contact us. We will be happy to help you.

Thank you.