Windows 10: hyperx quadcast s no devices found

hello ive been having an issue with my hyperx quadcast s not devices found when it's plugged into my pc but i can it picks up some audio when i truoble shoot it but still saying no devices found and when i talk and make clip theres no audio of me talking.. i've tried all different usb ports and still nothing yes it was working fine but when i went to update the software it just wouldnt connect, when i plug it into my pc nohting happens but when i unplug it it says device disconnected. I just re-installed all the drivers after uninstalling, restarted my computer, updated BIOS etc and nothing se

:)

 

HyperX Cloud 2 Headset lost Microphone output Quality after Windows 10 upgrade.

Hi,



Thank you for writing to Microsoft Community Forums.



I understand it can be frustrating when the Microphone is not working properly after upgrading to Windows 10. For further clarity on the issue and to guide you accordingly, respond to the questions listed below:

1. Are you facing the issue only with Discord application?
   
2. Have you tried using any other headset/microphone?
   

I suggest you to follow the steps mentioned below and check if that helps.



Method 1:



Try disabling NVIDIA Virtual Audio Device and check if that helps.

1. Press Windows key + R. This will open
   Run. Alternatively, you can go to Start and search for Run.
   
2. In Run dialog box, type
   devmgmt.msc and hit enter.
   
3. Now expand the Sound, video and game controllers.
   
4. Right click on NVIDIA Virtual Audio Device (Wave Extensible) (WDM) and click on
   Disable.
   

Method 2;



Update the firmware for HyperX Cloud 2 gaming headset, you can download the firmware from the official

website of HyperX.



We await your response.



Regards,

Prakhar Khare

Microsoft Community – Moderator

 

HyperX Cloud Stinger Mic Is Not Working

Hi there! I am Louie, a Microsoft Community member and a fellow Windows 10 user like you. Hope you're doing well and safe there.

You try this options to fix the issue:

Fix #01: Check your connections

The first and the most simple cure to your problem is to check your connections. Many times the connection is loose or the microphone is not plugged in properly which leads to mic failure. Check and fix the loose or hanging microphone connected to your device
to solve the issue in no time.

Fix #02: Enable audio devices

Your HyperX Cloud Stinger mic may not be working because your audio devices are disbaled. You can enable them from audio settings on your device. Simply go to your audio settings and enable the mic and speakers from there. Make sure they are not muted or the
volume is not too low, which might make you think that the mic or speaker is not working.

Fix #03: Set HyperX Cloud Stinger mic as the default device

Maybe your HyperX Cloud Stinger mic is disabled or not set as the default device on your computer. You can easily re-enable it and set it as the default device as follows:

-Press Win+R key to bring up the Run dialog, then type “control” and press Enter.

-In Control Panel, select Large icons from the View by drop down menu in the top right corner.

-Click on Sound.

-Click the Recording tab, then right-click on any empty place inside the device list and select Show Disabled Devices.

-Right-click the Headset Microphone and select Enable. Then right-click it again and select Set as Default Device.

Fix #04: Update your headset driver

The mic on your HyperX Cloud Stinger headset won’t work if you are using wrong or outdated driver. So you should update the driver to see if that’s a problem for you. Follow these steps to do this:

-Open the Sound window following the first three steps from the above Fix #03.

-Go to the Playback tab, right-click on your headphones and select Properties.

-Click on the Properties button in the Controller Information section.

-Then click Change Settings.

-Click the Driver tab and select Update Driver.

-Let the Windows Search automatically for updated driver software.

Once you’ve updated the driver for your HyperX Cloud Stinger headset, restart your computer. Then check to see if the microphone is working.

Fix #05: Reset/reinstall Windows

If the issue persists, chances are your operating system has corrupted files or configurations that are preventing your headphone’s mic from working properly. You can reset or reinstall Windows to solve this problem. Remember to back up your computer first
to help avoid any data loss.

Once the Windows is reinstalled on your PC, reinstall your headset and see if it fixes the problem for you.

In case the mic on your HyperX Cloud Stinger headset still isn’t working, it’s probably a hardware issue.

Hope this information helps

Sincerely,

Louie

 

Taskbar bug: switching to another window -will not appear at the front


Follow either of these steps to fix the issue with the Active window hiding behind.

Method 1:
I suggest you to disable window by hovering over it with the mouse and check if it helps. To do so I suggest you to try the below given steps and check if it helps:

1. Press Windows key + X key and click on Control Panel.
2. Select or click Ease of Access.
3. Click or tap onEase of Access Centre.
4. Click on Make the Mouse Easier to Use was uncheck Activate Window by hovering over it with the mouse.
5. Check if issue is resolved.

Method 2:
I would suggest you to completely uninstall the touchpad driver and reinstall it. Kindly follow the below given steps.

1. Press “Windows key + X” and click on “Device Manager”.
2. In the list of devices, you should see the touchpad drivers.
3. Right click on the device and then select "Uninstall".
4. In the uninstall dialog, make sure you select the option to delete the driver package from the system. This causes the driver package installed earlier to be deleted.
5. In the Action menu of Device manager, select “Scan for Hardware changes” option. This will cause the device driver to be reinstalled. Once the driver is installed, close all windows and restart the computer.