Windows 10: I am getting bsod error. I shared the bug check analyst below. Can you support me in...

***************************************************************************** ** Bugcheck Analysis ** ********************************************************************************KERNEL_MODE_HEAP_CORRUPTION 13aThe kernel mode heap manager has detected corruption in a heap.Arguments:Arg1: 0000000000000012, Type of corruption detectedArg2: ffffad8ef5400100, Address

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD/BUG Check 04F

The 04F error code is mainly a hardware error, since you have ruled out the ram, I would suggest it's either a HDD or as you mentioned a pagefile error. I would start by enlarging your pagefile to a fixed (set at min and max) 8096GB and test from there, you may find that solves your problem, as you multitask, open and close different apps the pagefile is just not clearing fast enough.

If that fails to do the job, I would suggest downloading a free HDD error checking utility, there are a few out there and many are better than the Windows offerings and give that a run and see if it comes up with anything.

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.