Windows 10: I am getting BSOD errors as soon as I start my laptop.

I get BSOD errors when starting my laptop, the BSOD errors are different every time. Here are the names of some common ones:Hypervisor error, IRQL_NOT_LESS_OR_EQUAL What failed: ntoskrnl.exe, System Thread Exception not handled, there are also others that I cannot remember.I also factory reset my laptop but that didn't seem to work.Please help me out on this. Here's the link to the minidump files.Also my mindump files are not getting consistently created and only 3 are created by far, so here are those three.Dump Files

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

BSOD driver_verifier_iomanager error

Hey all,

Wonder if anyone can help me with this error i keep getting on my laptop. It started completely randomly a few days ago and now i cannot boot the laptop normally at all. It goes into the bsod the restart loop until eventually attempting start up repair which also fails.

However, I can boot into safe mode just fine which leads me to believe as the error code suggests that it is indeed a driver issue with something. Thing is I have not to my knowledge installed anything new for some time so am unsure what driver could possibly be the issue here. I'm also clueless as to how to track down what is causing the error or if there are any logs i could check.

Does anyone have any experience with this error. I've ran memory diagnostics and checked the stability of my ssd and all seems fine there so am I right to assume that because it boots to safe mode fine the problem must be on the software side and not a hardware fault?

Any help would be much appreciated as I'm currently living away from my english speaking home somewhere finding a trustworthy computer repair shop isn't at all a walk in the park.

Many thanks
James