Windows 10: i am trying to change from legacy to UEFI

i am trying to change from legacy to UEFI but UFEI framework settings is missing also secure boot is not enabled i changed the bios setting to UEFI only but it still says in system information that it still legacy

:)

 

Legacy to UEFI

I'm debating moving to UEFI form my now legacy BIOS (Award Software Int.) the mother board is a GA-Z68XP-UD3 rev1.0 on the the following link it shows a UEFI BIOS U1J )UEFI BIOS)

https://www.gigabyte.com/Motherboard/GA-Z68XP-UD3-rev-10#support-dl-bios

Currently I'm running the legacy F10 BIOS. Does installing the UEFI BIOS automatically take care of everything to get to the UEFI BIOS? Installing the UEFI BIOS following the instructions using the Q-flash method https://www.gigabyte.com/webpage/20/HowToReflashBIOS.html

What's steps do I take and in what order?

Much appreciated

 

Quick UEFI/Legacy question

I have had Hawaii cards and Fiji cards with UEFI roms, used 1 at a time on an Asus P5K Premium motherboard LGA 775 with Q6600 without an issue. AMD ROMs are Hybrid ROMs ie have a legacy section with UEFI module, so you won't have an issue with card which has UEFI ROM on legacy system. The legacy sytem will just ignore the UEFI module in vbios.

To make Windows show UEFI as bios mode you need your Z97 Pro Gamer in "Pure UEFI" mode (ie CSM = OFF). Windows IIRC only changes between legacy / UEFI on install, so even if you change to CSM=Off it may not show UEFI bios mode in Windows system info tool. I have not had 2 GPUs in a system at one time, even if I had them, I thought my PSU was not up to the job, so can not comment if only the primary display card requires UEFI module and it is irrelevant if secondary GPU does not.

If you get black screen/issue after setting CSM off then remove the card with legacy ROM, if mobo boots then you'll know you need to update the ROM on that card.

 

Problem Regarding Bios Change from UEFI to Legacy

I have hp pavilion p045tx with windows 10 pro. I recently install Ubuntu with windows 10 so for that I convert my bios setting from UEFI to Legacy mode for install third party software like wireless Driver and all in Ubuntu.
But after every restart the bios setting change to default and that is to UEFI mode and that will cause an problem of no OS detect. Every time I have to go to bios setting and enable the legacy mode to start my OS. Can anyone suggest me what to do in this
case.