Windows 10: i am trying to download the windows media creation tool on a 32 gig usb flash drive but it...

my laptop doesnt see my 32 gig usb flash drive , what can i do

:)

 

Failed Media Creation Tool attempt at bootable USB flash drive

Shawn, these are the steps being referred to that NavyLCDR posted. They work for both UEFI and MBR.

Here are the steps to create a standard Windows 10 USB flash drive:

1. Use the Media Creation Tool to download and save the ISO file to your hard drive.
2. Insert the USB flash drive.
3. Open a Administrator Command Prompt and enter: diskpart (if it isn't an administrator command prompt, it will ask for administrator permission).
4. list disk
5. select disk # <- replace # with the actual disk number of the USB flash drive
6. clean <- this will erase the disk selected above, make sure you selected the USB flash drive!
7. create part pri
8. format fs=fat32 quick
9. active
10. exit
11. exit - and if the first Command Prompt was not an Administrator Command Prompt, exit that one too.
11. Mount the ISO file saved by the Media Creation Tool. If you are using Windows 8 or 10, you only have to right click on it and click on mount. If you are using Windows 7, then you must use a program like WinCDEmu to mount the ISO file:
WinCDEmu - the easiest way to mount an ISO. And more...
12. Copy all the files and folders from the mounted ISO file to the USB flash drive.

That's as simple as it gets. Between steps 7 and 8 you can enter: "select part 1" without quotes - but it should not be necessary.
Between steps 8 and 9 you can enter: "assign" without quotes - but it should not be necessary.

 

Failed Media Creation Tool attempt at bootable USB flash drive

Hi,
Ive just had another failed attempt at creating a bootable Windows 10 USB flash drive on my laptop using the Media Creation Tool and setting the tool to use the USB flash drive as chosen media rather than the ISO method. It failed after the download had finished and at the point where it has verified the download and begins to create the media..it failed at 51% with an unexpected error screen. That was my third and final attempt with the same error at the same point every time..this time with a brand new flash drive. Im now going to use the Diskkpart method but Im still going to use the Media Creation Tool to download the Windows 10 ISO. Then use Mount and copy and paste the files over onto the USB. Am I going to be OK to download the Windows 10 ISO using the Media Creation Tool again or will it try to download the ISO to the same folder (wherever that is) on my hard drive causing possible corruption or conflicts with my new Windows 10 ISO download?

 

Media Creation Tool question

Thanks Cerberus but Ive no problem downloading the Iso with the media creation tool. I don't think its the ISO that is the problem' I think the problem is when the Media Creation Tool is creating the bootable USB flash drive. So I think I can use the Media Creation Tool for that part...and as you say try something like Rufus to create the bootable USB flash drive

I still have this question though "The tutorial here says after going to the Microsoft site and selecting the Download Tool (Media Creation Tool) option that the Media Creation Tool should be save to the PC and run from there.
On Microsoft site the instructions are to Download the Tool and select Run (no saving to the PC). Is there a reason for saving it to the PC first as suggested on Tenforums?"

I was curious to see if others had encountered the issue I had with the Media Creation Tool. Ive never had a problem using it before