Windows 10: I am trying to install windows 7 sp1 and after the 2nd part of the installation...

I was trying to install windows 7 on my HP Pavilion g6g6-2300 laptop.When the installation procceeded to the 2nd part of the installation where you dont need to boot off of the usb it crashed with an error code of:STOP: 0x0000007E 0xFFFFFFFFC0000005,0x[16 zeros],0xFFFFF880033247E8,0xFFFFF88003324050I tried going into the safe mode environment with networking,with command promt,last known good config..but none of them worked.i tried disabling Legacy Support in BIOS but that displayed the windows logo with a red rectangle on the top of the screen, stretching from start to end.

:)

 

Windows 7 when to install SP1

I install Windows 7 with SP1 included *Smile
However, on vannila I did SP1 first and then rest.

 

Windows 7 when to install SP1

Always install SP1 first, then go to askwoody.com for Windows update speed fix and find out what updates from WUD are telemetry or break windows 7.

 

Windows 7 when to install SP1

This is our procedure

1. Prepare for Windows (prferaby ISO w/ SP1) installation with USB tool or use available media
Windows USB/DVD Download Tool - Microsoft Store

2. Connect boot drive data cable to lowest numbered SATA port .... but don't connect:
-Ethernet cable
-SATA Data Cable for any other drives

3. Install Windows to boot drive

4. Turn off Windows ability to install Hardware drivers
https://www.tenforums.com/tutorials...iver-updates-windows-update-windows-10-a.html
http://www.sevenforums.com/tutorials/82137-drivers-turn-off-automatic-driver-installation.html

5. Install all hardware drivers from original media in boxes See Item 7 below

6. Connect ethernet cable and run Windows Update till it stops doing anything

7. Install latest drivers for ALL hardware from manufacturers web sites. The reason we didn't do this in step 5 is 3 fold:
-Sometimes MoBo CD comes with licensed utilities with product key embedded and these are not on web site versions
-Its advisable to establish a working out of box conditions
-Sometimes newer drivers require latest Windows Updates

If you have a 2nd drive ....

8. Shut down and connect HD data cable to 2nd lowest numbered SATA port.

9. Boot to BIOS and make sure that SSD is the 1st boot device, if not fix it

10. Boot to Windows