Windows 10: i am unable listen audio from speaker . hardware ids are...

unable to listen audio from speakerhardware ids:INTELAUDIO\FUNC_01&VEN_10EC&DEV_0236&SUBSYS_10280A25&REV_1000 INTELAUDIO\FUNC_01&VEN_10EC&DEV_0236&SUBSYS_10280A25

:)

 

audio and speakers problems

Hi,

It is possible that audios and speakers were not recognized due to wrong configuration settings or outdated drivers. To isolate your issue, we'd like to gather more information:

• Have you made any recent changes prior to this issue?
• Have you tried connecting your speaker/headphone to another device and check if the issue still persists?
• Have you tried connecting another speakers/headphones and check if the issue still persists?

Meanwhile, we suggest that you run the troubleshooter by clicking on this
link. It will let you automatically diagnose audio problems and will provide you a remedy.

If the issue still persists, we recommend that you run the troubleshooter for Hardware and Devices. This will identify and diagnose technical issues. Follow the steps below:

• Press Windows key + X on your keyboard and select
  Control Panel.
• On the upper right part of the Control Panel window, type
  Troubleshooting.
• Select Troubleshooting.
• Click View all.
• Click Hardware and Devices and follow the prompt to proceed with the troubleshooter.
• Restart your PC and check if the issue still persist.

Let us know if you need more assistance.

 

WinTV-1800 Pass through Audio?

let me look up that model of the card and see what i can find out.

edit: their site really sux... no real information about the hardware. If I found the right one, your's has two RCA connectors near the bottom of the card. I'm guessing this is the Line-In feature for this card.

this is the best I can think of... (assuming windows 7 properly detects the hardware's line in)

Step One: Plug in the audio from the PS3 to the RCA on the tuner
Step Two: Right click the speaker icon near the clock on the start menu and select "Recording Devices"
Step Three: Look for anything listed that relates to your TV tuner's Line-In, make sure it is enabled. When it says its "Ready" right click on it and select "Properties"
Step Four: Click the "Listen" tab
Step Five: place a check in "Listen to this device" and in the dropdown menu under that select your speakers for the playback.
Step six: Play a game and test the audio... If its working Enjoy!
Optional step... go back to step three, when the properties box comes up click the "Levels" tab. Here you can adjust the input volume of the device

Hope this helps, and that it lets you do so

edit: should you decide to get an adapter for the rca, these steps are pretty much the same for the line in on your sound card.

 

Re-enable audio device

Hi,

I would be happy to assist you.

Before we proceed with troubleshooting, I would need little information on the issue.

• Are using speakers / head phones to listen to audio?

If you have disabled the audio device, then you might not see it under the list of playback devices. I would suggest you to follow these steps to make sure you see the disabled devices:

• • 
    Open
    Control panel.
    
  • 
    Click Hardware and Sound and then Click on
    Sounds.
    
  • 
    Under Playback tab, right click on the empty area and make sure
    “Show Disabled Devices” has a check mark on it. If headphones/Speakers are disabled, it will now show up in the list.
    
  • 
    Right click on the device and
    Enable it. Click OK.
    

If the issue still persists, try enabling speakers automatically using steps below.

• 
  Go to Settings> Click on themes> Advance sound settings> right click on the speakers or the audio device youo have connected > click on
  Configure device.
  
• 
  Test the sound level you want, click Next.
  
• 
  And configure the audio devices.
  

Hope this helps you. Do reply if you need further assistance on Windows 10.

Thank you.