Windows 10: i axadently deleted lan and wan drives help me pls

plssssssssssss help

:)

 

Internet/LAN/WAN Services Are Not Working!

Hi,

Welcome to Microsoft community.

We understand that, Internet/LAN/WAN services are not working on your system and we are glad to assist you to fix the issue.

• Which applications did you use to use the Wi-Fi?

Please follow these steps below, to resolve the issue:



Network troubleshooter:



Open the Network Adapter troubleshooter by typing troubleshooting in the search box, and then tapping or clicking Troubleshooting. Tap or click Network and Internet, tap or click Network Adapter, and follow the instructions on your screen.



I suggest you to remove the same applications and re-install the Wi-Fi drivers and check, if the issue persists.

Uninstall and Reinstall the Wi-Fi
Network Card Drivers.

Step 1:

Uninstall the Wi-Fi
Network Adapter Drivers:

• 
  Press “Windows Logo” + “X” keys on the keyboard.
  
• 
  Click on “Device Manager” from that list.
  
• 
  Search for the Wi-Fi
  Network Adapter from the device list, right click on it and then select “Uninstall”. On the un-installation Window, if you have an option: “Delete the driver software for this device” you may select that and then remove the corrupted drivers from the computer.
  
• 
  Follow the on-screen instructions to complete it and the restart the computer, if prompted.
  

After the restart, please go ahead with the next steps to install the latest
Wi-Fi drivers and check, if that resolves the issue.

Step 2:

Go to the Computer or Wi-Fi
Network Card manufacturer’s website and search for the latest Windows 10 drivers available for the Network Card model and then install it by following the instructions given in the website.

Also, for the RAM and processor not available or showing up on your system, then follow these steps below.

1. Press Windows key + R key.

2. Type msinfo32 in the RUN command Window.

3. Check, information about RAM and processor in the System information Windows.

For more information, let’s try to follow the steps in the Microsoft articles below and check, if it helps:



Fix network connection issues:

http://windows.microsoft.com/en-in/windows-10/fix-network-connection-issues

Why can't I get online?

Windows help & learning - Microsoft Support

Hope the above information helps. Reply with necessary information and the result to help you further.


Thank you.

 

Good LAN party games?

Most of my suggestions have already been listed.

However, I found Swat4 to actually be a pretty fun LAN game, especially at smaller LAN parties.

 

Setting up a Router & PC to a WAN port for Router bandwidth testing

That might need some clarification. Click to expand...

That link has more clarification, instruction and screenshots you should check out. *Wink

To clarify what I said a little, you setup two LAN subnets for this test, one for the WAN-side and one for the LAN-side of the router. Also, there's no real reason to have or use DHCP here aside from configuring the LAN-side IP address of the router. I would also recommend you set everything statically to prevent DHCP from changing any addresses, which it likely wouldn't but has the potential to depending on variables at play.

So in this example you could use 192.168.2.0 subnet for the WAN-side.

• Router WAN port set static to 192.168.2.1
• PC1 NIC port set static to 192.168.2.2

Then use 192.168.1.0 for the LAN-side.

• Set router LAN to static to 192.168.1.1 (usually in DHCP settings on a home-grade router).
• Set PC2 NIC port static to 192.168.1.2
• In router, go to DMZ, set IP address of device to be in DMZ to 192.168.1.2
• Setting DMZ will allow bypassing of the NAT Firewall, or you can set up firewall and routing rules to push traffic between subnets. Honestly the easiest thing to do here is placing PC2 in the DMZ on the router.
  • At this point, if you ensure all devices have ICMP (ping) inbound enabled (Windows Firewall look for ICMPv4 File and Print on inbound, make sure enabled...Windows is known to have this enabled on some devices and disabled on others), you should be able to ping all devices from any other device. This will let you know that network subnet traversal is working correctly.

Once done there, pick your methods for performing bandwidth testing. *Toast :toast: