Windows 10: I can hear a beep when my USB flash disk is inserted into the computer, and the logo in the...

As the title shows, my USB flash disk cannot be displayed when inserted into the computer, and the USB flash drive is grayed out in the "Devices and Printers" interface.Previously, I used this flash disk formatted as a boot disk to install the system, and then reassigned the drive number, but I haven't used it for a long time, so I plugged it in today and it became this way.But the taskbar will appear flash disk icon, "Device Manager" in the driver uninstall reinstallation has also tried, but it does not work.The disk management interface can also be displayed.Many methods on the Internet and

:)

 

Usb flash drive, please insert disk into drive error?

i updated my computer and updated windows as the hardware troubleshooter suggested and that did not work

i tried diskpart and tried going through disk management as admin it does let me pick to change as the above pics show and i have windows 10 64 bit the usb is a monster digital 16gb usb

 

USB Flash drive please insert a disk

Usb flash drive please insert a disk, tried different computers.

Updated drivers.

Changed drive letter. Uninstalled driver and reinstalled. Checked for updates.

Ran troubleshooter.

Please help I have a document I really need....

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!