Windows 10: I cannot go to bios it just goes straight into the windows

I'm currently using windows 10. I tried doing the recovery and going to UEFI settings, but in my situation there's no UEFI option in mine so I don't know how I'll be able to do it. can anyone please help

:)

 

bios

Hi all i am new in this forum, i need meanings step by step of each item listed in the bios Phoenix-Award

 

Computer start up goes straight to Bios.

If you cleaned the hard drive with Diskpart Clean Command then of course it would go to the BIOS because you haven't yet reinstalled Windows 10!

I will give you all possible steps to troubleshoot Windows installation failure which work in about 90% of cases. If not we'll go from there:

Follow the illustrated Clean Install steps in this tutorial which compiles the best possible install that will stay that way as long as you stick with the tools and methods given: Redirecting

Make sure all other drives and peripherals are unplugged. Update the BIOS or UEFI firmware to latest, or reset to Defaults, making sure (if you have it) UEFI is enabled, CSM or Legacy BIOS disabled, Windows Boot Manager set first to boot, if necessary disable
Secure and Fast Boot until after install, set SATA controller to AHCI, Save changes and Exit. Access BIOS/UEFI Setup as shown here: Comprehensive List of How (Key to Press) to Access BIOS for Various OEM and Computer Systems « My Digital Life

https://www.groovypost.com/howto/reset-pc-bios-defaults-nvram-mac

Create the latest Windows 10 Installation Media by installing Media Creation Tool and following the directions here: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install. If you're using another PC to do this uncheck the box for Recommended
Settings to choose the exact version and bit rate for the target PC only.

Insert media, boot it by powering up PC while pressing the BIOS Boot Menu Key: https://www.sysnative.com/forums/ha...u-f-keys-hotkeys-system-manufacturer-oem.html

If the media won't boot you may need to enter BIOS/UEFI Setup (pressing key given in chart in link above) to turn off Fast Boot or Fast Startup first. If you can start Windows enter UEFI firmware here: http://www.isunshare.com/windows-password/four-methods-to-access-uefi-bios-setup.html

The media may also be bad, so confirm it boots and queues up per these steps in another PC, or else recreate it. You can also try a DVD, or the alternate download site from MS TechBench here: https://tb.rg-adguard.net/public.php. Burn to DVD using WIndows
Image Burner or create bootable flash using one of the options here: https://www.tenforums.com/tutorials/2376-create-bootable-usb-flash-drive-install-windows-10-a.html

Choose the boot device as a UEFI device if offered, on first screen press Shift + F10 to open a Command Prompt, type the following commands, each followed by Enter key:

DISKPART

LIST DISK

SEL DIS # (replace # with the disk # of the Windows disk from list in previous command)

CLEAN

EXIT

Close Command Box, on second screen choose Install Now, then Custom Install, then at the drive selection screen choose Unallocated Space, click Next to let it create needed partitions and start install - this makes it foolproof.

Make sure to follow the setup steps in the first link tutorial to complete your install. Drivers are important enough that those steps are printed in red.

You will get and keep the best possible install to the exact extent you stick with the steps, tools and methods in the first linked tutorial. It's a better install than any amount of money could buy and a great learning experience that will make you the master
of your PC.

If all else fails you can move the hard drive to another PC to do the install with it plugged in alone. Windows 10 is remarkably adaptive to new hardware without needing adaptive restore. If it will start it will swap out all drivers requiring several restarts.
You can also try applying a same-version System Image to the intact SSD/hard drive.

I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it's resolved.

 

Computer start up goes straight to Bios.

A while back I had an issue with my computer thinking it was a hard drive issue and tried to fix it without any professional help, I dont have much knowledge about computers and messed up my computer even more. I thought busted my hard drive because I
cleaned my hard drive and did something else in command prompt and after that my computer goes straight to bios. I ordered a new hard drive thinking it would start up, but it didnt. Not sure if I have to do something to activate the hard drive or if it's not
the hard drive that's the issue. Please help if anyone can.