Windows 10: i cannot play cyberpunk because of my driver having to be updated but when i update my...

so i cannot play cyberpunk because of this which i really would like to do but everytime i update my drivers my screen resolution just gets stuck on 1024 and i have to go through a 5 hour cycle of getting it fixed to go back to normal but than my drivers are still not update, if you have an answer please respond to the post, thank you.

:)

 

Driver update software

Windows Update should have a considerable amount of good drivers. They'll be listed under the "Optional Updates" section. That should give you rather good functionality right off the bat. If it's a branded PC, latest drivers will likely have to come from the manufacturer's website. For the most part, built-in drivers should be Good Enough™

I don't think I've run across an automagic driver installer that wasn't loaded with malware.

 

Intel Readies P55 Chipset B3 Stepping Update

Intel's is readying a hardware update for its P55 Express chipset, currently the only core-logic for the company's brand new socket LGA-1156 processor platform. The new B3 stepping of the P55 PCH will bring with it a little more than new MM number and S-spec numbers. A list of changes is as follows:

• New MM number and S-spec numbers for the converted products;
• Firmware and minor BIOS updates are required with the conversion;
• Processor MRC/microcode update required to enable future processors;
• Recommended storage driver upgrade from Intel MSM 8.9 to Intel RST 9.5.

Although it is listed that the MRC update enables 'future processors', Intel, in a statement issued to X-bit labs assured that the current B2 stepping of the chipset (found on current socket LGA-1156 motherboards) does not leave out support for any of Intel's new LGA-1156 processors that are slated for release in the very near future. The dual-core "Clarkale" 32 nm processor will be supported by both B2 and B3 steppings of the chipset.

P55 B3 stepping is pin-identical to P55 B2, and hence motherboard vendors will not have to come up with new designs. Sampling of the new stepping began as early as on October 02, 2009, and it is scheduled for shipment to manufacturers by the 7th of December, 2009. P55 is the performance core-logic for the LGA-1156 platform. It supports Core i5 and Core i7 "Lynnfield" processors with discrete graphics.

Source: X-bit labs

 

Can't update to current ATi drivers

In my previous attemps to update drivers I went through the complete process you mentioned, but using driver sweeper...I don't really know if there is any difference between the two programs, but sweeper was recommended by the sticky post here on how to update drivres...so that is what I used when first trying to update.

Any how I just followed your pervious suggestion and down loaded and installed v8.10 over the old drivers. I also tried to updated directly from the device manager...but it kept telling me I have the most recent version, which in device mgr now says v8.54.....But after using CCC to search for the most current drivers which were the 8.10 that I installed, CCC is listing in the Info Ctr under graphic software, Driver package version 8.541 (which are digital signer by MS) and Catalyst Version 08.10.

So I'm guessing that even though the device mgr lists current drivers at 8.541, my drivers are infact updated to 8.10 in the CCC ?

Man this is making me dizzy.... *Twitch :twitch: