Windows 10: I can't boot up my pc past my mobos boot page

I start my computer and it comes up with "gigabyte insist on ultra durable" and "del:BIOS SETUP\Q-FLASH" etc but I can't press any button, it's frozen on that screen the keyboard is plugged in properly. I tried restarting my pc but that didn't do anything, I need help

:)

 

My pc does not get past the Mfr name in booting up

Hi Bill,

There may have been changes with the system that's why you are unable to get past the manufacturer screen when you boot up the PC. It's important we look into the possible causes to come up with the best resolution to the problem. Please answer these questions:

• Did you make any changes on the computer before this started?
• Did this start after installing updates?

You can try removing all peripheral devices connected to your computer and see if there will be any changes when you boot it up. It is possible that the driver of the external device prevents your computer from booting up correctly.

You can also access the recovery environment in Windows 10 and try one of the available options to repair your system. The different options are explained on this

page.

Since you are unable to log in to Windows, follow these steps to access the recovery environment:

• Restart the computer while holding down the Shift key on your keyboard.
• If the first step does not work, you can force the computer to shut down by pressing the power button or unplugging the power cord when you boot it up. This process may need to be performed a few times before you get to the recovery options.

Let us know if the suggestions above allow you to get back into your computer.

Feel free to post your questions if you have any.

We're here if you need more help.

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

PC wont boot up (No POST, No Video)

I recently installed a new Asus M5A99X Evo r2.0. The motherboard green LED lights up and the case and cpu fans spin. But there is no video when its hooked up to my monitor.

Steps that i have tried:
"No POST", "system won't boot", and "no video output" troubleshooting checklist

Made sure all connections are properly connected.

Flashing the CMOS

Tested the PSU

Followed all steps in the user manual

If there are any links that you guys can point me to or suggestions that could help it would be highly appreciated. Thank you