Windows 10: I can't detected my nvme during new installed windows 11. No disk drive detected..I'm using...

I'm want to installed a new windows but can't detected my new NVME after boot from USB windows installer.

:)

 

Windows 10 installer don't detect NVMe drive

Thanks. This helped but only partly.

NVMe disk is now listed in choose-disk step but installer says that its unable to install WIndows on this disk because it has MBR partition. Windows can only be installed on GPT disks in EFI systems.

What should i do now ?

 

NVME M.2 SSD detected in BIOS - not detected in Windows 10 x64

Hi,

I purchased an PNY CS3030 2TB M.2 NVME SSD disk which I installed in my system. My BIOS can see it just fine under my NVME Configuration menu options, and also the BIOS function to do a controller test for this disk passes without a problem.

However, in Windows 10 x64 (up to date) I am unable to see the disk in Device Manager, or Computer Management / Disk Management section - meaning I can't initialize and format the drive.

This is a second NVME disk in this system. My first one which is also the boot/system disk is a Samsung Evo 970 Plus (also seen in the BIOS, right next to the PNY) and functions properly in Windows.

System specs:

AMD Ryzen 3900X

Asus X570 Pro - BIOS version 1405 (latest available as of this time)

32 GB DDR4 3600MHz Patriot Viper 4 (4x8GB)

Disks:

- Samsung Evo 970 Plus 500 GB M.2 NVME

- PNY CS3030 2TB M.2 NVME

- 2x WD Blue 10EZEX SATA 7200RPM 1TB drives configured in RAID0

- 1x WD Blue 320GB SATA 7200RPM

GPU: Sapphire RadeOn RX560

Power: Corsair RM1000x

OS: Windows 10 x64 Home

As said, all other disks work fine. Initially I was thinking this to be a driver issue of some sort, since the BIOS can see the PNY just fine but Windows can not. I also made sure I installed the latest available chipset and SATA drivers (I know its NVME,
but still.. ) from my motherboard manufacturer: ASUS, at PRIME X570-PRO｜Motherboards｜ASUS Global

I do not think the PNY is deffective, otherwise my BIOS would not detect it, and it would also not pass the BIOS' NVME controller tests.

Ideas?

 

Windows 10 installer don't detect NVMe drive

I have 2 drives:

• disk1 (SATA SSD, with Ubuntu 16.04)
  • partition1 (sda1: flag /boot)
  • partition2 (sda2: flag /home, encrypted by LUKS)
• disk2 (NVMe SSD)

So, the goal is to install Windows 10 on disk2 and boot it from GRUB (which is on sda1).

What is the problem ?

In disk-choose step, disk2 is missing. However Ubuntu 14.04 installer "see" this disk, so I assume that is software issue, rather than my hardware.

What I tried to solve this problem ?

• loaded Samsung NVMe drivers from this thread
• patched Windows image using DISM tool by adding 2 updates. I followed this guide
• tried to run Windows 10 installed on USB stick to install it

All of them failed.

Please help me to solve this issue.