Windows 10: I don't see my recovery flash drive in the boot menu

I have a flash drive that has the windows media creation tool on it, but i don't see it on the boot menu. The device doing this is a think center desktop on windows 10.

:)

 

Can't boot from DVD drive

Is your controller in RAID/AHCI modes? If so, the DVD drive will be listed as a separate device in the list of available boot devices, not as "CDROM". Remember that when setting boot device priority. Otherwise, read the manual to see which hotkey during POST brings up the boot menu that lets you select which device to boot from. Even here, the drive will be listed separately, and not as "CDROM".

 

How does Windows boot to advanced recovery option e.g. command prompt?

- that gives me a 454 'Unexpected error' This tells me that the BCD is partially corrupted.

The commands: shutdown.exe /r /o /f /t 00
or: %SystemRoot%\System32\Cmd.exe /c reagentc /boottore&shutdown /r /f /t 00
should boot into Recovery if everything is configured correctly.
FYI, If Windows is configured correctly:

1. If Reagentc is disabled, you still can get into Recovery but with limited options.
2. If Reagentc is enabled, you'll get all options.
3. If you boot Windows using Recovery USB stick, You'll get into Recovery with couple of options missing.

Here's my suggestion if you want to try:
OPTION 1: Will save the trouble of re-install Windows.

1. Download the image of my first 3 partitions (450MB Recovery, 100 MB EFI partition, and 16MB unformatted primary)
   EFI_Boot-00-00.7z - Google Drive
2. Run Macrium and restore the image from step 1, overwriting your existing 1st three partitions, leaving C alone.
3. Delete the 490MB Recovery partition.
4. From Macrium, run fix boot problems.
5. Reboot. Open Admin command prompt then run Reagentc /info to make sure that it is enabled. If not, enable it.
   if failed to enable, reboot and try again.

OPTION 2: Assuming you've already had Windows backup with Macrium.

1. Wipe out the first 5 parttiions. (450MB, 100MB, 16MB, C Drive, 480MB)
2. Fresh install Windows 10
3. Restore C drive from backup image, run fix boot problems
4. repeat step 5 from OPTION 1 above.

 

Recover files from Flash drive

According to me, the best flash drive recovery software which i have used and recovered files easily. It is very easy to use and within few steps you can recover data from flash drive. http://billhoyer.com/recover-corrupt-flash-drive-mac