Windows 10: I don't think my new hard drive is configured correctly

I installed a new 1TB HDD, 7200rpm in my laptop. I upgraded to Windows 10 in December. Looking in Disk Management I only have a Disk 0 with what appears to be 4 partitions. the first one is 1.46GB labeled Healthy (Active, Recovery Partition)but under Capacity has 1.45GB & then under Free Space has 1.46GB 100% free, no file system, the second is Volume (C: ) 915.48GB Capacity, NTFS, Free Space 775.89GB 85% free, Healthy (Boot, Page File, Crash Dump, Primary Partition), the third is 450MB Capacity with 450MB free space 100% free with no file system, Healthy, (Recovery Partition) & the fourth is 14.13GB Capacity, 14.13GB free space 100% free with no file system, Healthy, (Primary Partition). This just doesn't look right to me. Is it? If not, what can I do about it? *Shock

Attachment 72322

TOSHIBA LAPTOP SPECS

SYSTEM MODEL
Toshiba Satellite L775D PSK4OU-OOGOOP

OPERATING SYSTEM
Windows 10 Home x64 Version 1511 Build 10586.71 IE Version 11.63.10586.0CO
Chrome Version 48.0.2564.103 m
Boot Mode: Legacy BIOS in UEFI
Secure boot not supported

MAIN CIRCUIT BOARD
Board: Pegatron Corporation TKBSS 1.50
Bus Clock: 100 MHz
UEFI: American Megatrends Inc. 1.50 10/18/2011

PROCESSOR

1.40 Gigahertz AMD A6-34OOM

APU with Radeon HD graphics
Graphics Chipset:AMD Radeon(TM) HD 6520G512
4096 primary memory cache
4096 secondary memory cache
64=bit ready
BIOS Version:012.043.000.001
BIOS Part Number:BR40547.bin
BIOS Date:04/07/2011
DRIVES
915.418GB Capacity hard drive775.89 GB hard drive free
HGST HARD DRIVE - 7K1000-1000 - 1TB 7200RPM, Drive 0 P/N: H2T10003272S, SATA 6 0G6/S, TYPE: TSTSAF100, P/N: W:0J22423, MLC: DA6326 HL-DT=ST BDDVDRW CT31F Optical Drive
PCI to USB host controller 3x
Standard open HCD USB host Controller 3x

MEMORY MODULES
8GB RAM

LOCAL DRIVE VOLUMES
C: NTSF on drive O 622.92 GB

CONTROLLERS
ATA Channel 0
ATA Channel 1
Standard dual channel PCI IDE Controller
Standard SATA AHCI Controller

BUS ADAPTERS
MS Storage spaces controller.
Standard Enhanced PCI to USB Host

:)

 

Windows 10 - Can't Run Applications From Search

I think you have misunderstood, my computer is picking up my hard drive, just the diagnostic test isn't. In addition, the instructions given by Nyima Yonten don't work after the Creators update, as the settings menu has been changed. Never the less, I have
verified the status of my hard drives, and they are all working correctly.

Thanks for any help

 

broken hard drive

My laptop is Sony Vaio and last year I let I drop had to get a new hard drive 750GB. My laptop screen was going so I kept turning it off and I and after a while it said no hard drive. My laptop is only three years old and I would rather replace my hard
drive than getting a new laptop just as much and I don't think my laptop would allow me to backup my files. And do I do it if I don't have a hard drive is there a way

 

Your Hard Disk is configured correctly. Disk management will not show those partitions using up space, and all of those partitions are correct. After upgrading to Windows 10 it creates new recovery partitions as the previous recovery partition won't work with Windows 10.

Everything looks good to me.

I'm just unsure of the partition at the end, the 14.13GB one. That may be an old recovery partition for an old OS perhaps

 

Thank you. That's a relief!