Windows 10: I format LOCAL DISK C using cmd on safemode

I format my local disk c in safemode. Now how do I RECOVER my laptop to the original OS with preinstalled drivers in i

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Networking in Safemode

I tried uninstalling and re-installing the adapter and it didn't work. I tried another suggestion I found doing a search. They suggested to click on the Network Icon before booting in to Safemode and connecting to the adapter. The only thing listed was Airplane mode. I guess Windows 10 will not initialize a wireless adapter in Safemode.

 

Formatting a Disk

You can use the clean command & see if that allows you to format it.

Under diskpart

List disk

Select disk x where x is the number of the new drive

Clean

Then run the cmd to format the drive.