Windows 10: I got big problem need help

So in my bios the safety boot is turn on but in info system he is turn off and also the cpr 7 is writh as elevation required to view : its in frenchNom du système d’exploitation Microsoft Windows 11 Famille Version 10.0.22631 Build 22631 Autre description du système d’exploitation Non disponible Fabricant du système d’exploitation Microsoft Corporation Ordinateur DESKTOP-R1CU58E Fabricant Acer Modèle Nitro AN517-52 Type PC à base de x64 Référence SKU du système 0000000000000000 Processeur IntelR CoreTM i5-10300H CPU @ 2.50GHz, 2496 MHz, 4 cœurs, 8 processeurs logiques Versio

:)

 

help to remote connect

not sure how to use both programs u 2 suggested, i need more helpful steps thanks

 

Big problems with Windows 10 after installation.

Hi,

Welcome to Microsoft Community and thank you for your interest in Windows 10.

I understand the inconvenience that you are experiencing. I will definitely assist you.

This issue may occur due to the outdated display driver or come file are corrupt. For now do not re-install Windows 10, try the below steps and check if it helps resolve the issue.

Step 1. Update the display driver.

I would suggest you to update Display driver. Follow the below steps:

• Press Windows key + X and click on Device manager.
• Locate for Display Adaptor and expand it.
• Right click on the adaptor and click on update.

Step 2. (Unspecified error 0x8000ffff),

For the issue error 0x8000ffff, I suggest you to check if the Volume Shadow Copy service is running on your computer or not.
To check for the same follow the steps below:

• Press Windows key + R, type “services.msc” on the box and hit Enter.
• Locate for “Volume Shadow Copy” and check if the service is started.
• If not ‘Start’ the service by right clicking on it.

If the service was already started, I would suggest you to stop the service and restart the same.

Hope this helps. If you need further assistance with Windows, let us know and will be glad to help.

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.