Windows 10: I hard shutdown on blue screen and the pc is not booting , what can I do to get it to boot?

I was using my pc and then blue screen came up and I needed to use my computer so , I hard shut downed at 25% and when I tried booting it , it said a disk read error occurred press ctrl+alt+del to restart and nothing would change if I restarted it ,I can run bios of course but I don't really know what to do . How can I fix this issue?

:)

 

Blue Screen Will Not Boot Up

removed both sticks of memory maybe loose or dusty retry 1 at a time still will not boot
only blue screen tried to boot safe mode still same

 

Blue screen and stop code

Hi
Jeferis,

There are a lot of factors for this matter to occur. To isolate the issue, we have some questions for you:

• 
  What activity have you done to
  trigger the NTFS and FAT FILE SYS loop?
  
• 
  were there any error messages?
  
• 
  What troubleshooting steps have you done so far?
  

It is possible that the
Boot
Sequence were corrupted by the previous activity which
triggered the Blue Screen Error and the loop. We recommend that you perform these
suggested troubleshooting
and see if there are any changes:

Startup Repair.


To access the
Startup Repair Screen, turn off the
PC 3-4 times(force shutdown),
while on the Blue screen Error. This will route you to the
Startup repair screen:

Advanced Boot Options > click Troubleshoot > Advanced options > Command Prompt

and run the following command:

Run SFC Scan:  

SFC
will
scan
and
run
an
automatic repair
to any
corrupted system files
that it will detect. We suggest that you perform it twice. To run an
SFC scan, follow these steps:  

• 
  Run
  Command Prompt as Administrator.  
  
• 
  Type
  sfc /scannow
  and hit
  Enter.   
  

Boot Record:

This will fix the corruptions on
boot records or boot
sequence. To run this command, follow these steps:

• 
  Run
  Command Prompt as Administrator.
  
• 
  Type the following command:  
  
  • 
    Bootrec /fixMBR  
    
  • 
    Bootrec /fixBoot
    
  • 
    Bootrec /rebuildBCD
    

Update us on how it goes.

Regards.

 

Unable to boot windows due to missing or corrupt files

Hi Callum,

There are several reasons why your PC isn't booting properly. One of which is because of broken boot data configuration components. To isolate the issue, we highly suggest you to boot your PC in Safe Mode. Given that you cannot access the setup screen, please
follow these steps:

Do the improper shutdown process:

• Turn on your computer.
• When the Windows logo is visible, unplug the computer. Do this thrice.
• At the 4th boot, simply wait for the Windows Recovery Environment window to appear.

After doing the improper shutdown process, please follow these steps:

• On the Choose an option screen, select Troubleshoot.
• Click Advanced options then, Startup Settings.
• Click Restart.
• Once the PC has restarted, press the F4 key to boot in Safe Mode.

Let us know if the resolution worked for you.