Windows 10: i have a bsod and have a bug check, please help me to figure out whats the problem

https://drive.google.com/file/d/1tJYBY1_HdWDrj0wyNIPWdAO-pFe96pMa/view?usp=sharing . the dump files

:)

 

BSOD/BUG Check 04F

Microsoft says:

M4 SSD's dropping off of mobos is stability issue, IMHO. I can replicate it, even, it's caused by making Intel MEI unstable, I think. It's not just M4's, either(I have two), you'll find nearly every SDD has one or two users with this problem. What happens, it seems, is TRIM command is sent to SDD, but it's not completed before the system shuts down, and loses power, and the queued command not being resolved causes the drive to disappear from BIOS.


as to BSOD codes, you can find the full list here. I just looked up your code.:

http://msdn.microsoft.com/en-us/library/windows/hardware/hh994433(v=vs.85).aspx

 

Bug check error: 0x00000133 on Windows 10

Hi,

Thank you for posting in Microsoft Community and being part of Windows 10.

I understand your concern about accessing your device after performing a bug check, we will help you with this issue.

Do let us know the following to assist you better with this issue:

• Are you able to boot the device to desktop?
• What is the complete error message along with error code of this issue?
• What is the make and model of your device?

If you are able to log-in to the desktop, try few of the below troubleshooting steps and check if it helps.

Step 1: Run Memory Diagnostic Tool.

Follow the below steps:

• Press Windows key and type
  Memory Diagnostic.
• Select Windows Memory Diagnostics
  and click on Restart now and check for problems.
• Follow the on-screen instructions.

Step 2: Run the Power Troubleshooter


Power troubleshooter find and fix problems with your computer's power settings to conserve power and extent battery life

• 
  Type Troubleshooting in the
  Search bar on the desktop and press Enter.
  
• 
  In the Troubleshooting window, click on
  View All on the left pane.
  
• 
  Click on Power.
  
• 
  Click Next and follow the on-screen instructions to complete the troubleshooting process.
  

Step 3: I suggest you to check for the pending updates on your device install them and check if it helps.

Steps:

• Connect to the internet.
• Press Windows key and type
  updates.
• Click on Check for updates.
• Under Windows Updates, click on
  Check for updates.
• Try to install the updates being shown.

Hope it helps. Kindly update the status of this issue, we will be happy to assist you further.

 

BSOD/BUG Check 04F

The 04F error code is mainly a hardware error, since you have ruled out the ram, I would suggest it's either a HDD or as you mentioned a pagefile error. I would start by enlarging your pagefile to a fixed (set at min and max) 8096GB and test from there, you may find that solves your problem, as you multitask, open and close different apps the pagefile is just not clearing fast enough.

If that fails to do the job, I would suggest downloading a free HDD error checking utility, there are a few out there and many are better than the Windows offerings and give that a run and see if it comes up with anything.