Windows 10: i have a problem about my windows 11, i think my BCD is totally broken, i used all the...

i used all the troubleshoot that i read here but no progress .*fileBCD can't restore, can't rebuild, can't create*bootrec /scanOS can't identified a windows*SSD appeared in BIOS but not in diskpart*load drivers need to browse thru RST to unhide the partition*others people says i need to transfer boot.ini in SSD or need a repair tool but i didn't know how, anyone can solved my problem ?

:)

 

windows 11 think's it's in preinstallation after rebuilding the bcd store

1) Please try the "Resolution" part in this article (ignore the title). That should take care of the issues.

2) And, to fix the description in BCD, run this command from admin CMD Prompt:

• bcdedit /set {current} description "Windows 11"
  

 

How to clean up BCD entries? Rebuild the BCD?

This is normal that under Recovery Environment, The letters are re-assigned. This is why you have to be careful and select the correct one.
@dictum
Advice: Never use Easy BCD with Windows installed using GPT disk. Use Easy UEFI instead provided you know what you are doing. Easy BCD only works with MBR disk type.
Base on the screen shot above. Your disk 0 is your new Windows and your disk 1 contains the old Windows. Disk 3 contains a 512MB Fat32 partition and I don't know what that is. I suggest you disconnect disk 3 for now before proceeding.

Let rebuild new BCD's for both disk 0, and disk 1. Please follow step by step on the 2 screen shots below. On step 3, write down the drive letter for PM981_New. In the screen shot, My Windows is still assigned to C but it might be different from yours. In step 10, if the drive letter is different than C, then use the letter in step 3.

Do exactly the same for disk 1, this time select disk 1 in step 4 and assign letter V in step 7, Use V and the drive letter for Old Windows in step 10. This will create a new BCD for PM981_Old and you will be able to boot separately from boot menu.

From boot menu, select which one to boot from.
Once booted into Windows. If you wish, you can set up dual boot for Windows old & New. Under This PC, look for the drive letter of the offline Windows and type:
bcdboot X:\Windows where X is the letter of the offline Windows

 

Windows 11 upgrade failed.

Thanks.

The BCD or the EFI boot partition's file system is corrupt. Rebuilding the EFI boot partition fixes this issue.

Please go through these links for more information:

• How to Rebuild the EFI Boot Partition, BCD and Boot Files
  
• Windows 11 does not install. - Microsoft Community
  

If you need step-by-step assistance in this regard, boot into WinRE Command Prompt.

Then run:

• mountvol y: /s
  
• bcdedit
  
• diskpart
  
• list vol
  

For each command, photograph the screen and upload it to OneDrive.