Windows 10: I have issues with the internet connection right after restarting my computer. It works in...

When I restart my computer sometimes for updating or anything else, it does not connect to the Wireless Wi-Fi internet. I go through all the steps provided, but it still doesn't connect to the internet network. As a last resort, I have to run the network trouble shooter in Windows 10 to help me out. I have experienced a lot of difficulties connecting to the internet network through Bell Inc. I'm not sure what it takes to get a secure internet network connection. What should I do?

:)

 

Intermittent internet connection issues

Hello Trevor,

Thank you for posting your query on Microsoft community.

There are some reasons that causes this error connection reset. Let’s try to identify the root cause and apply the appropriate solution to fix this.

I suggest you to run the network troubleshooter first, and check if the issue persists. To run the troubleshooter, follow the below steps:

1. Press ‘Windows + X’ key.
   
2. Select ‘Control panel’
   
3. In the search box, type ‘Troubleshooter’ and then click ‘Troubleshooting’
   
4. Under ‘Network and Internet’ click on ‘Network adapter’ and click on ‘Next’ button.
   

Try to update the network adapter and check if the issue persists.

1. Press ‘Windows + X’ key.
   
2. Expand the network and adapter’
   
3. Right click on the device, and select ‘Update driver software’
   
4. Restart the computer and check.
   
5. You can also check for updates from the system manufacturer site.
   

Check proxy settings by doing the below steps:

1. Go to Control panel – Internet options.
   
2. Click on ‘Connections’ tab.
   
3. Click on ‘LAN settings’
   
4. Uncheck ‘Use a Proxy server for your LAN’ check box, and click ‘Ok’
   

I also suggest you to reset IP Address by following the below steps.

1. Press Windows key, and type ‘Command prompt’
   
2. Right click on it and select ‘Run as administrator’
   
3. Type the following command without quotes, and press enter: ‘netsh winsock reset catalog’
   
4. Restart the system once and check if the issue persists.
   

Try to disable Kaspersky firewall and check if that helps

1. Open the Kaspersky Internet Security program.
   
2. Click the ‘Settings’ button.
   
3. Click the ‘Firewall component’ option under Protection Center.
   
4. Select the ‘Enable Firewall’ option to remove the check mark.
   

Hope it helps. Please reach back if the issue persists.



Thanks and regards

Naveen M

 

Internet Connectivity Issues

So heres the deal. My brother who is behind the opposite wall of me is having internet issues. The router is here in my room and his internet is plugged into the Linksys E2000 via a wire going from it to an ethernet wall socket going to his room and into his computer.

He has been having iffy internet for the past 2 days. Fixed it yesterday by rebooting now the problem has resurfaced.

What we have tried:

• Testing the ethernet cables with a tester. Passed
• Tested onboard ethernet with known working cable (computer hooked up using my connections in my room) Passed
• Checked to make sure there was no static IP address in IPv4 settings. Passed
• Made sure the Network Connection wasnt full on disabled. Passed
• Swapped the cable leading from the router to the wall outlet in my room. Passed and worked for a few minutes.

With regards to that last bullet point, the computer is no longer getting internet again despite working for a few minutes. Testing the new cable again, tells us that pins 1 and 2 are "open". That is the second cable in a row that the tester is spitting this message out on.

Any ideas guys? Im out of them.

 

Connecting computer with no internet connection to network printer


@dk1971

1. Open Admin command and type: ipconfig
   
   
   
2. Win+X->Control Panel->Netwok and Sharing Center
   Follow the screen shot. This should disable internet access from this PC but allows access to local device(s)
   NOTE: Use the IP & Subnet Mask from step 1. Leave Default gateway & DNS Server blank