Windows 10: I have trouble with Routing and remote access windows server 2012 R.2

Hi experts,My office is use a computer windows server 2012 R.2 run as gateway to connect the internet, VPN, routing another site...NIC details- Nic 1, name "wan" to connect internet. IP 10.0.0.2/24- Nic 2, name LAN connect local network 1. IP 192.168.2.0/24 - wire connection. This network have a different gateway with ip 192.168.2.1/24 connect to another sites of company.- NIC 3, name Wifi local network 2, just for wireless connection IP 10.10.10.0/24Now I've trouble about route from local networks 2 "wifi" as follow:- If clients connect the LAN network IP 192.168.2.0/24 everything is ok

:)

 

Script to add a rule for Routing and Remote Access

• From Firewall I want to add a rule - Routing and Remote Access.
  This rule can be added manually, but I want to add it from the command prompt.
  I am using Windows 10 Pro 20H2.
  To add manualy, open Control Panel -> Windows Defender Firewall -> Advanced Settings ->
  -> Inbound Rules or Outbound Rules -> New Rule -> Predefined -> from drop down list choose Routing and Remote Access ->
  -> Next -> Check all checkbox
  Routing and Remote Access (PPTP-In),
  Routing and Remote Access (L2TP-In),
  Routing and Remote Access (GRE-In) -> Next... Next - see print screen.
  How to add from CMD ?
  
  

 

Server 2012

IF you want to try seizing the FSMO roles to see if it will help, here is a quick guide (this should be done on the DC you want to keep):

https://blogs.technet.microsoft.com...ation-master-roles-in-windows-server-2012-r2/

Knowing that this is a DC now I'm really convinced that something is wrong with the AD account for this particular server. It's possible that the promotion to a DC didn't work correctly leaving you with a sort of broken DC.

A reboot is always worth a shot; has that been tried Ahhzz? If it has, then the next step would be to demote this DC and rejoin it to the domain. Once rejoined you can run DCPromo again. Microsoft best practice is to have at least 2 DCs for redundancy.

 

remote access to the server is not enabled

-server domain windows server 2012

-admin can not login remotely to the server ?

-can login local on console

-it was working buy suddenly remote login stooped ?