Windows 10: I have two roku streaming devices on my network, but only one shows up in network map

I have two Roku streaming devices on my network, but only one shows up on the network map in win10 and win7

:)

 

Network Map not showing all network machines


I have just upgraded 4 W7 machines to W10 to add to our 8 pc LAN. On checking the network map only the same 3 of the 8 are showing. I have pinged with IP and name and obtained a result, also checked advanced sharing settings and all correct and same as existing machines. The network is set to private. Any suggestions how I can get these machines to show the full network map

 

How to delete old share from showing up in network

Use these steps to remove a mapped network drive using Command Prompt:

1. Open Start.
2. Search for Command Prompt, right-click the top result, and select the Run as administrator option.
3. Type the following command to delete the mapped network drive and press Enter: net use d: /delete In the command, replace the “d” for the drive letter of the mapped drive you’re trying to remove.
   
   Code:
   In the command, replace the “d” for the drive letter of the mapped drive you’re trying to remove.
   
   
4. Restart your computer.

After you complete the steps, the mapped network drive should not longer be available on your device.

 

Network will not show on the last device.

Hi James,

I suggest you to remove all the networks that are connected to your device and check.

If the issue persist, I suggest you to follow the steps below.

An outdated or incompatible network adapter driver can cause connection problems. If you recently upgraded to
Windows 10, it's possible that the current driver was designed for a previous version of Windows. Check to see if an updated driver is available.

• 
  In the search box on the taskbar, type Device Manager, and then select
  Device Manager from the list of results.
  
• 
  In Device Manager, select Network adapters > the network adapter name.
  
• 
  Right-click (or press and hold) the network adapter, and then select Update Driver Software >
  Search automatically for updated driver software. Follow the steps, then select
  Close.
  
• 
  After installing the updated driver, select the Start
  
  button >
  Power > Restart if asked to restart, and see if that fixes the connection issue.
  

If Windows can’t find a new driver for your network adapter, visit the PC manufacturer’s website and download the latest network adapter driver from there. If your PC can't connect to the Internet, you'll need to download a driver on a different PC and save
it to a USB flash drive, so you can install the driver on your PC. You’ll need to know the PC manufacturer and model name or number.

Rely us with the status to assist you further.

Regards,

Guru Kiran