Windows 10: I install win11, after restart my NVME can't detect

I install win11, after restart my NVME can't detect anymore. I restart my PC and try Install OS again, but the problem can't found any driver. It seems my NVME already dead ..

:)

 

NVMe missing during Windows 11 Installation

Hello, I bought this NVMe

https://www.amazon.com/dp/B093QL29RZ?ref=ppx_yo2ov_dt_b_product_details&th=1&pldnSite=1

Installed correctly onto the motherboard. When I boot to Windoze 11 installer, it does not detect. Linux can detect and use.
2022-UEFI only HP Laptop i3 8GBDDR3.
On Western Digital website, they do not have a specific downloadable driver available on the product page for this NVMe. So I downloaded a pack of drivers for all their NVMe models, booted the Win11 installer, and located the driver, but the Win11 installer says it is hiding it because it is not compatible with my hardware, I thought that was odd. The driver pack does include the same Model number ‎SN350, but instead of just saying "‎SN350" like my product detail says, the WD driver pack says "‎ULtrastar ‎SN350". Is that driver a slightly different NVMe drive type, even if the model number is the same? Anyway, how do I get the Win11 installer to recognize my NVMe, if WD does not provide a compatible driver?
To get around this, I booted into Linux, it detects my NVMe perfectly, then I did full disk clone using CloneZilla my old SSD Win11 installation to the NVMe, rebooted to the NVMe, which now had fully installed Win11 installation, but it crashes.
To get around that, I put a Win11 installation onto a USB drive, and booted to that, and installed the WD Dashboard, but it could not detect my NVMe, so instead I installed the WD driver program, and it did install the NVMe and it worked after that. Because this worked, perhaps I could solve this by recloning the Win11 installation from the USB drive to the NMVe now that the Win11 installation has the driver installed and working?

I contacted WD, spoke with senior support, and they confirmed there is no stand alone driver for this product.
What is the best and most elegant solution to this? Thank you.

 

Windows 10 installer don't detect NVMe drive

Thanks. This helped but only partly.

NVMe disk is now listed in choose-disk step but installer says that its unable to install WIndows on this disk because it has MBR partition. Windows can only be installed on GPT disks in EFI systems.

What should i do now ?

 

Windows 10 installer don't detect NVMe drive

I have 2 drives:

• disk1 (SATA SSD, with Ubuntu 16.04)
  • partition1 (sda1: flag /boot)
  • partition2 (sda2: flag /home, encrypted by LUKS)
• disk2 (NVMe SSD)

So, the goal is to install Windows 10 on disk2 and boot it from GRUB (which is on sda1).

What is the problem ?

In disk-choose step, disk2 is missing. However Ubuntu 14.04 installer "see" this disk, so I assume that is software issue, rather than my hardware.

What I tried to solve this problem ?

• loaded Samsung NVMe drivers from this thread
• patched Windows image using DISM tool by adding 2 updates. I followed this guide
• tried to run Windows 10 installed on USB stick to install it

All of them failed.

Please help me to solve this issue.