Windows 10: I just changed the amount of ram on my computer and it isn't booting. It takes me to a page...

I just changed the amount of ram from 6gb to 8gb, and I added a WiFi card.

:)

 

Printer isn´t working after latest update.

After the latest update from Windows, my Canon Pixma ip6600 printer isnt working. In Device Manager it shows up as working properly but when I go to print it isn´t listed as an option in any programs. Troubleshoot suggests it´s a USB 2 printer on a USB
3 port and that that´s the problem but that cant be since it worked fine before the update. I´ve tried to uninstall and plug it back in but that doesn´t work either.

 

Unable to boot the computer.

Hi Samid,

Thank you for posting your query on Microsoft Community.

Before we proceed, we would require more information to assist you further.

• 
  What is the make and model of your computer?
  

I suggest you check if you are able to boot into Windows Recovery Environment using installation media. Follow the steps provided below and check.

• • Insert the installation USB and boot Windows 10 from it.
  • In the ‘Windows setup’ page select the ‘language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
  • Click on ‘Repair your computer’ and select ‘Troubleshoot’.

Check if you are able to boot to this window. If you are unable to boot to this window, I suggest you to contact the manufacturer and check.

Hope this information is helpful. Reply us with this information to assist you further.

Thank you.

 

computer won't boot but has power

I would still say try a different PSU... here is a solid budget power supply:

http://www.amazon.com/dp/B00H33SDR4/?tag=tec06d-20

Interesting with the NIC connection...not sure what to make of that. What are your system specs? Make/Model of all your components? Check my system spec's for an example.

Honestly I would do process of elimination to another step...and that step would be the PSU. If nothing changes after that..I would try to force flash the CMOS if possible..to ensure no corruptions lie within that.

I would also try as I suggested above and try to boot with minimal hardware... you need an STDIN...Keyboard, STDOUT...VGA, CPU, stick of RAM and power to be able to perform POST on the mainboard. So starting with that would be a great place to go next.

If nothing changes..depending on what you're running a different CPU might be the next step... by the time you're done...you might have built a different PC. But you'll also have more experience in PC diagnostics which is a huge plus for odd issues like these...wish it was in front of me so I could examine and diagnose.