Windows 10: I just installed updated windows 10 but my SD Card reader is not detected

Hi,


I just installed updated windows 10 but my SD Card reader is not detected, I appreciate your help. Thank you.

:)

 

SD Card reader not working.

Hi,

There are several reasons why your SD card reader is not working. To assist you better, kindly answer the questions below:

• Have you made any changes to your computer prior to this issue?
• What are the other troubleshooting steps have you done so for?
• Have you tried to use another SD card reader and see if it is getting recognized or detected by your computer?

Regards.

 

SD Card Reader

Hi, i hope you're doing good today.

Let's try the following and see if some of these methods works for you.

1. Check SD Card in Disk Management

If your SD card doesn’t show up in Windows 10 File System, but in Disk Management, check whether there is a drive letter for the card. Follow the steps below to add a drive letter:

Step 1. Right click “My Computer” and select “Disk Management”.

Step 2. In Disk Management, your SD card will appear as a removable disk. Check if it has a drive letter like D or E.

Step 3. If not, right click the SD card and select “Change Drive Letter and Paths”.

Step 4. Click “Add” and select a drive letter, then click “OK”. Your SD card would be working in File System along with local disks.

Check SD Card in Disk Management

2. Remove SD Card Write Protection

There is a knowledge point that write protected SD card will not be displayed on other devices, except the original one. So if you did lock your SD card before, the first thing is to remove write protection from SD card. Check the lock switch beside the card
or use disk utility. It can also fix SD card not showing up on Windows 10.

3. Reinstall/Update SD Card Driver

When you update Windows 10, it will automatically renew all device drivers. But if you still have problem with a device, it is still well worth a try to update or reinstall the driver. Here’s how to update/reinstall driver to repair (micro) SD card not detected
on Windows 10:

Step 1. Click “Start” and enter “Device Manager”. Select it from the results.

Step 2. Find your SD card and right click it, then select “Update Driver”.

Step 3. Select “Search automatically for updated drive software”. If there is no new driver, try to look for one on the manufacturer’s website and follow the installation wizard.

Step 4. If it doesn’t work to update driver, just right click the device and select “Uninstall”. Then restart your computer, and Windows will reinstall the driver by itself.

4. Enable SD Card Reader

Disabled SD card will not show up on Windows 10. The steps to enable this function are the same as above. First find your SD card in “Device Manager” and right click it. If it shows “Disable Device”, then you have already enabled SD card reader and there is
no need to do anything. If not, just select the option “Enable Device”. Then Windows 10 could detect your SD card normally.

5. Run Hardware and Device Troubleshooter

Troubleshooter is a built-in repair tool in Windows 10. It helps to fix common computer problems. You can also use it to solve (micro) SD card not detected on Windows 10 problem.

Step 1. Click “Settings”> “Update & security”> “Troubleshooter”.

Step 2. Select “Hardware and Devices”, then click “Run the troubleshooter”. After detecting the problem, the troubleshooter will fix it automatically.

Regards.

 

SD card reader gone again!!!!

Please follow these steps:-

Step 1. Right click “My Computer” and select “Disk Management”.

Step 2. In Disk Management, your SD card will appear as a removable disk. Check if it has a drive letter like D or E.

Step 3. If not, right click the SD card and select “Change Drive Letter and Paths”.

Step 4. Click “Add” and select a drive letter, then click “OK”. Your SD card would be working in File System along with local disks.

But if you still have problem with a device, it is still well worth a try to update or reinstall the driver. Here’s how to update/reinstall driver to repair (micro) SD card not detected on Windows 10:

Step 1. Click “Start” and enter “Device Manager”. Select it from the results.

Step 2. Find your SD card and right click it, then select “Update Driver”.

Step 3. Select “Search automatically for updated drive software”. If there is no new driver, try to look for one on the manufacturer’s website and follow the installation wizard.

Step 4. If it doesn’t work to update driver, just right click the device and select “Uninstall”. Then restart your computer, and Windows will reinstall the driver by itself.

5. Enable SD Card Reader

Disabled SD card will not show up on Windows 10. The steps to enable this function are the same as above. First find your SD card in “Device Manager” and right click it. If it shows “Disable Device”, then you have already enabled SD card reader and there is
no need to do anything. If not, just select the option “Enable Device”. Then Windows 10 could detect your SD card normally.

Hope this Will Help

Please revert back