Windows 10: I keep getting BSOD after BSOD not sure what is going on

I bought a used computer, wanted to factory reset it myself, reinstalled a fresh version of windows 10 but have been getting a whole bunch of different errors. Trying to figure it out any help is greatly appreciated! Processor AMD Ryzen Threadripper 3970X 32-Core Processor 3.69 GHz Installed RAM 64.0 GB 63.9 GB usable Edition Windows 10 Pro Version 22H2 Installed on ‎1/‎31/‎2025 OS build 19045.5440 Experience Windows Feature Experience Pack 1000.19061.1000.0 Minidump:https://drive.google.com/drive/folders/1cH8gf7BZ2ngDfwrCpPMwlre3g9lmI_s6?usp=drive_link

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD randomly

friend keeps getting BSOD
any suggestions?

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile