Windows 10: I keep getting BSOD error DPC_WATCHDOG_VIOLATION

This happens when I leave Roblox run afk overnight and during the day, and every time I come home its always on a BSOD errorThe only thing I can think of that's new in terms of hardware is a Philips module that controls lights via Alexa, however that plugs into my eero Wi-Fi extender that then plugs into my pc through ethernet so its not even directly plugged into my pc. I have heard that applications such as Nvidia broadcast can cause DPC_WATCHDOG_VIOLATION specifically when playing Roblox, which I do have installed. The only problem is I cant test through trial and error what the cause is as

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

can't upgrade to 1903 - now Nvidia driver gets DPC_WATCHDOG_VIOLATION BSOD

I've had 1803 for a very long time and it never was able to successfully upgrade to 1903.

The error was

Installation Failure: Windows failed to install the following update with error 0xC1900101: Feature update to Windows 10, version 1903.

The most recent Windows update now causes my machine to get DPC_WATCHDOG_VIOLATION. I found that if I unplug my monitor from NVidia GT 710, the error and BSOD goes away. I tried removing and reinstalling the MIcrosoft recommended driver and the BSOD came
back.

So I removed the driver and have plugged into the builtin DVI port, so I only get 1980x1080, instead of 4K resolution.

So is there a way to force the upgrade to 1903? If I do will that resolve the DPC_WATCHDOG_VIOLATION BSOD?

Any other suggestions?

Thanks very much!

 

DPC_Watchdog_Violation

Hi Steve,

For us to effectively assist you to resolve the DPC_WATCHDOG_VIOLATION error, were there any changes made to your computer prior to this issue?

You will be getting the DPC_WATCHDOG_VIOLATION error if the hardware driver is having an issue. Please check the following thread to resolve this:

• BSOD with DPC_watchdog_violation error
• DPC_WATCHDOG_VIOLATION (Windows 10)

We're looking forward to your reply.