Windows 10: I keep getting these error when I boot up my pc, probably easy to fix but I’m dumb

submitted by /u/unnas14
[link] [comments]

:)

 

ATIFlash 'ERROR 0FL01' FIX

If you have been suffering messages such as 'Adapter not Found' and 'ERROR 0FL01' or even 'Invalid Adapter or BIOS Selected' when trying to flash or reflash your Video cards Bios and you are lucky enough to own a PC capable of running more than one PCI-E Video card then this could just be the Guide you've been looking for.

--------------
Required Files
--------------
*HP USB Disk Storage Format Tool
http://h20000.www2.hp.com/bizsuppor...swItem=MTX-UNITY-I23839&jumpid=reg_R1002_USEN
--------------
*USB Boot Files
http://www.4shared.com/file/43544416/39060a9e/HPUSBFW_BOOTFILES.html?s=1
--------------
*ATIFlash
http://www.techpowerup.com/downloads/1731/ATIFlash 3.79.html
--------------
*Your Video Cards Bios
http://www.techpowerup.com/vgabios/...re=&manufacturer=&model=&interface=&memSize=0

------
Part 1
------
Step 1 Create USB Boot Drive with HP USB Disk Storage Format Tool

Step 2 Copy all the USB Boot files to the USB Boot Drive (do not overwrite files when prompted)

Step 3 Copy ATIFlash files USB Boot Drive

Step 4 Copy new BIOS file to USB BOOT Drive (name it something like bios.bin as you will be using this name in a DOS Prompt later on)
------
Part 2
------
Step 1 Boot into 'Safe Mode' (by pressing f8 before booting into Windows)

Step 2 Uninstall ATI Drivers and Associated Software then Reboot
\
Step 3 Go to Device Manager 'Display Adapters' and Uninstall (including Software when prompted)

Step 4 SHUT DOWN your PC (DO NOT REBOOT, if you should so happen to Reboot repeat Step 3 above)
------
Part 3
------
Step 1 Remove your Video Card from the top PCI-E slot and place it in a different PCI-E slot (this is the step that sets this Guide apart from all the others)

Step 2 Reboot into your Mobo's Bios

Step 3 Once in your Mobo's Bios change the first Boot Device to USB-HDD (or your Equivalent setting) then Reboot

Step 4 At the C:\ Prompt type, atiflash -ai 0 ,this will provide you with proof that your Video Card does infact exist

Step 5 At the C:\ Prompt type, atiflash -unlockrom 0 , i suggest you do this because some Bios files are infact locked and can't be flashed until unlocked

Step 6 At the C:\ Prompt type, atiflash -f -p 0 bios.rom , this is when your Bios is actually flashed

Step 7 Once your Bios has been flashed simply 'Ctrl+Alt+Delete' to restart your PC

Step 8 Go straight back into your Mobo's Bios and change your first Boot Device back to what it was (probably HDD) then Reboot for the final time and your finished
------

 

Code: 0x80072EE7 Easy Fix/Manual Fix

I have the Code: 0x80072EE7 "Looks like you're not connected to the internet" error when I try to connect to the Microsoft Store in Windows 10. In the Easy Fix category it says:

To fix this problem automatically, click the Download button. In the
File Download dialog box, click Run or
Open, and then follow the steps in the easy fix wizard.

I hate to seem like a dunderhead, but which "Download" button do they mean? I can't find it.

In the Manual Fix solution I can get to the page it suggests on my pc, but it says:

If the Hosts file contains a static IP address that is associated with Windows Update or with Microsoft Update, comment the entry by adding the # sign at the beginning of the entry.
On that page on my pc it doesn't have either a Windows Update or Microsoft Update line so I don't know where to place the # sign.

Any help would be appreciated.

 

vista boot error

Well, earlier today i was trying to setup a dual boot along with Xp and already had vista installed... so I made a partition on one of my HD's and went to install XP on it.. the instalation went back and I got an error that the CD was bad, so I rebooted and now I get the error Error Loading Operating System.. trying to figure out how to fix this.. I tryed playing in the BIOS along with using the Vista repair option but nothing helping.. my vista is on a different hard drive then where i tried to install XP to...not sure what else to do, I need to fix my boot file somehow... suggestions?