Windows 10: I met BSOD everyday even though I reset my PC.

Recently, my pc got bluescreen of death frequently. I checked my memory chips , GPU and CPU. They all working good. I decided to reset my pc with clean data. But It doesn't work. There are the problem description for these two days. Problem signatureProblem Event Name: BlueScreenCode: 4eParameter 1: 7Parameter 2: 1f7adaParameter 3: 4000Parameter 4: 0OS version: 10_0_19045Service Pack: 0_0Product: 768_1OS Version: 10.0.19045.2.0.0.768.101Locale ID: 1033Problem signatureProblem Event Name: BlueScreenCode: 1aParameter 1: 9

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

Multiple BSOD's Everyday

Hey,

I have recently purchased a new NVMe SSD, but as the title suggests, ever since I started using this SSD, my laptop has been bluescreening a few times everyday (rarely once), with various different stop codes. Some of these stop codes are:

KERNAL_SECURITY_CHECK_FAILURE

KMODE_EXCEPTION_NOT_HANDLED (What failed: iaStorAC.sys)

IRQL_NOT_LESS_OR_EQUAL

I didn't think this issue would appear so often, so I only started paying attention to these codes recently, thus why I only have a few to list. If anyone could help out a little, that would be much appreciated!

Thank you.