Windows 10: I need help fixing my monitor after a factory reset

I decided to factory reset due to my pc running weird and also a data leak and when I factory reset I was watching yt monitor was fine and once it reset my monitor boot screen had lines in it and continues to have lines in it but once I changed my refresh rate to 240hz this problem went down a little while play but is still noticeable and if I turn my monitor off the boot screen and it really bad and idk how to fix this it was ever since factory reset please help

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Diskpart : there are no fixed disks to show.. Factory reset gone awful

Hi everyone, I was asked to factory reset an Asus laptop and install a win 7 on it, while starting to install the win 7 I got stuck with the "no device drivers were found", searched for some tutorial on YouTube, found this vid: , followed the command codes step by step on MS-DOS : ( Diskpart >>> list disk >>> select disk 0 >>>> Clean >>>> create partition primary >>>> format fs=ntfs quick) and now I completely lost the disk 0 with all system files, no hard drive showing as a boot option in the BIOS. Am I screwed ? Is there a way to create or reactivate the internal HDD ?? Thank you in advance for your help

 

Factory Reset Windows10: There was a problem resetting your PC FIX


How to Factory Reset Windows10 or upgraded to Windows10 from Windows7 or 8.
This is also a FIX for the ERROR: There was a problem resetting your PC.
This fix is only for Legit Authorized Copies of Windows 7, 8, or 10.


Hey all, I upgraded to Win10 from Win8.1 when it was released for free upgrades in 2015. It is now 2016 and I wanted to Factory Reset my PC so I can start fresh again. I attempted to do it from Settings/Update and Security/Recovery/Reset this PC as suggested by Microsoft but I received and error saying "There was a problem resetting your PC. No changes were made." After searching the web I found many different fixes but they all seems so involved. Making a boot flash drive or burning a DVD and use their software... There is an awesome tutorial on this forum called Windows 10 Clean Install but I like to KISS when I can (Keep It Simple Stupid) so I decided to check with Microsoft.com before I started that process.


THE SIMPLE FIX I FOUND THAT WORKED FOR ME:
Go to: Windows 10
Click the "Upgrade Now" button.
Follow the prompts and you're good to go.
Works with Windows 7, 8 and 10. Simple enough for me

I wasn't able to find this simple suggestion when searching the web so I felt I should post it in hopes it helps someone too

-