Windows 10: i need help I keep getting the bsod for multiple reasons

It seems lik forever but I keep getting blue screened for multiple reasons. 362 errors in 7 days!! HELP

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Various BSOD Errors Help

Hey all,

I've received multiple BSOD errors the past 2 days after rebuilding my PC. I've been trying to figure out the issue.

These are the few BSOD messages I remember seeing:

• DPC_WATCHDOG_VIOLATION (multiple times)
• CRITICAL_PROCESS_DIED (one time)
• IRQL_NOT_LESS_OR_EQUAL (one time)
• WHEA_UNCORRECTABLE_ERROR (multiple times)

Here's a link to the dmp files and system information: WindowsIssue

Steps I've taken:

• fully updated drivers
• applied all Windows updates
• Removed unnecessary hardware
• Monitored CPU/GPU temps (log file on temps during last crash in share)

Any help would be appreciated.

 

BSOD Unknown Reason

The dump file on the 18th was caused by Quick Heal again. The later ones appear to be due to bit flips. I would recommend enabling Driver Verifier on all third-party drivers using the following instructions:

1) Search for verifier using the Start Menu and select the verifier.exe, accept the UAC prompt and you should be presented with the following screen:





2) Tick the following options as shown below





3) Ensure that you select the option to enable you to select drivers yourself





4) Select all drivers which are not Microsoft related and then click the Finish button. Afterwards, please reboot the computer and Driver Verifier will continue to run in the background. Please do not select the drivers which are prefixed with dump_