Windows 10: i powered on my windows 10 pc and automatic repair starts then i am greeted with a screen...

the last time i was using it i remember accidentally pulling out the power cord while it was running and the next day i tried to use it, i saw that automatic repair was starting and i originally thought nothing of it, until i was greeted with a blue screen that at the top read "Windows could not start correctly"i was devastated and immediately raced to try all of the recovery options i could, but none of them worked.i felt defeated, and like an idiot.i looked through many online tech forums, but no use.i started feeling hopeless, and desperate.help please

:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

Windows 10 - Automatic Repair - boots in 2nd cycle

Hello. This is similiar topic on our forum but now i will explain more brighter.
So last time after i change in my UEFI boot priority from :"UEFI USB KINGSTON" to "P1 SSD SAMSUNG EVO 250 GB" i am getting weird booting problem with Windows 10.







When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc. Then after this i get screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc . And when i click restart then Windows 10 boot fine. So i am needing 2 boots to boot properly to windows.

My disk is on MBR partirion. Is this related to my UEFI/Partitions?



Somebody said to me this:"UEFI booting requires a GPT disk. This is why Windows has to fix itself and only boots in 2nd cycle - as you keep trying to boot UEFI to an MBR disk."



Also i know that UEFI firmware can emulate BIOS functionality (CSM/Legacy) and work with MBR disks just fine. Or i am wrong? And cause is elsewhere?



I am a little confused. Thx for reply. My ssd Samsung Evo 250 GB , rams 2x8gb DDR3 Kingston Hyperx 1600mhz.

 

Two PCs go in to automatic repair mode after Windows 10 update

Hello,

Thank you for reaching out to us. Windows 10 computers may have encountered a system file corruption that caused this issue. For us to assist you better, kindly answer the following questions:

• Is this an update for Windows 10 1709 or 1703?
• Do you have a USB flash drive/bootable media?
• Have you made any recent changes to Computer no. 1 that couldn't perform a reset? Have you added a new hardware?
  
• Have you tried running a check disk from the Recovery screen?

Meanwhile, we suggest that you perform a Startup repair and see if you'll be able to perform a system restore on Computer 1. Kindly follow the steps below:

• Boot to Advanced Startup Options from a hard reboot. Press and hold the power button on your PC until it powers off and until it powers on.
  
• Wait until you see the Windows logo screen or Please wait
  during boot. Usually it may take repeating up to 3 times.
• Select See advanced repair options.
• Under Advanced Startup Options, select
  Troubleshoot.
• Select Advanced options. Under Advanced options, select
  Startup Repair.
• If prompted, select an administrator account to provide credentials for approval, type in the password and click
  Continue.
• Startup Repair will now start Diagnosing your PC, and will attempt to automatically repair it.

We'll be waiting for your reply.