Windows 10: I ran into BSOD when I restarted my pc. I cannot boot it from USB, I again run into BSOD...

BSODPlease help. Currently the error I get is PAGE FAULT IN NONPAGED AREA. What failed CLFS.SYS

:)

 

Random Restarts, No BSOD

He mentioned that he had done that above. Also I provided a BSOD details app. There were no BSODs to report.

 

Random Restarts, No BSOD

Reboot and hit F8 to get into the Windows Diagnostic Settings before Windows boots. Turn off "Automatic Restart on System Failure." This way we can completely rule out BSODs. Sometimes a PC will BSOD but the PC will restart so quickly that the BSOD is not even rendered.

 

BSOD on install from USB

Have an HP Notebook 14-cf0013dx, 8gb ram, 1TB HDD 5200rpm (full specs are in profile)

Attempting to reinstall windows after BSOD on start, mostly page fault in non paged area BSOD error but can also be irql not less or equal, or Kernel Secure check failure. Saw another one or two but cannot recall at the moment.

Symptoms. Can boot to USB in UEFI or legacy and Load the windows 10 install made from the windows creation tool. The loading files completes. The system restarts and the HP splash screen appears with the windows 10 dots circling underneath for about 2 revolutions then a BSOD.

First steps:
Tried windows 10 recovery. over 48 hours still not completed.
Ran HP hardware diagnostics, Memory HDD, system board all passed.
Ran memtest86 from Hirens Boot CD. passed.
Ran seagate HDD test. passed.
Tried windows 10 USB install after each step above.
Tried Windows 10 safe mode installation, was able to get through installation but on reboot the same results, BSOD within 3 revolutions of startup dot-circle.

Second steps:
Removed HDD, hooked up to main computer and did a CMD, DISKPART, CLEAN
Updated BIOS to most recent version F.53 to support windows 10 v.1909
Moved DIMM from slot 1 to slot 2
Tried HP cloud recovery with exact same results as listed above.
Tried Windows 10 USB safemode install again same results. Was able to complete installation from USB but BSOD on restart.

Short of replacing the Motherboard due to the integrated graphics memory (which still tested good in HP system board test), I am at a loss. Please help with any suggestions.