Windows 10: I reset my computer and then I turn of the power button because it was stuck at 59...

I reset my computer and then I turn of the power button because it was stuck at 59 percentage and now it keeps restarting . I also tried to turn it off and on but it still dont work

:)

 

Windows 10 Factory Reset Stuck at 59%

I have an HP computer that has run into a lot of trouble in how smoothly it runs, etc., so I decided to do a factory reset and clean the hard drive out of personal files completely. It's now been at it for about 24 hours, stuck from about 3 hours to 24
at 59%. Is it safe to turn off the computer or cut the wi-fi to the computer to try and redo its resetting process? Any other suggestions?

 

Making two buttons reset+power to turn on computer when pushed together?

The simple purpose of a power button is to short those two pins on the motherboard header. Simply put, unplug the silly pins for the reset switch. Send the + cable to the reset button, then - cable to the power button, and then run a cable between the two buttons, as essentially all they need to do is complete a circuit to enable the short.

 

Use the power button to turn off the computer at Welcome screen

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you want to turn off computer at the Welcome screen using the power button.



Ideally, if no user has logged in to the computer, the computer will shut down by pressing the power button. However, I would suggest you to check the settings for power button. Refer the steps mentioned below and see if that helps:

1. Press Windows key + X, and select
   Power Options.
   
2. Click on Additional power settings.
   
3. Now, click on Choose what power button does from the left pane.
   
4. Click on Change settings that are currently unavailable.
   
5. Select Shut down from the drop down for
   When I press the power button.
   

If you are using Windows 10 Pro, you may also want to check the Group Policy Settings, refer the steps mentioned below:

1. Press Windows key + R, to open
   Run dialog box.
   
2. Type gpedit.msc and click on
   OK.
   
3. Navigate to Computer Configuration\Administrative Templates\System\Power Management\Button Settings.
   
4. On the right pane, double click on Select the Power button action (plugged in), click on
   Enabled and select Shutdown from the drop down for
   Power Button Action.
   
5. Repeat step 4 for Select the Power button action (on battery).
   
6. Restart the computer.
   

If a user has logged in to the computer and then logs off from the computer, the computer will shut down by pressing the power button. However, if a user is logged in to the computer and locks the computer using the
Windows key + L combination, the power button will not shutdown the computer. You will have to use the power button on the lock screen to shut down the computer.



If you do not see the shutdown button, please refer the article Shutdown:
Allow system to be shut down without having to log on.



If the issue persists, I would suggest you to provide a feedback in the
Feedback Hub. The Feedback hub lets you tell Microsoft
about any problems you run in to while using Windows 10 and send suggestions to help us improve your Windows experience.



Regards,

Nikhar Khare

Microsoft Community - Moderator